Makita DUR369LZ - Инструкция по эксплуатации - Страница 21

21 ENGLISH

Switch action

WARNING:

For your safety, this tool is 

equipped with lock-off lever which prevents the 

tool from unintended starting. NEVER use the tool 

if it runs when you simply pull the switch trigger 

without pressing the lock-off lever. Return the 

tool to our authorized service center for proper 

repairs BEFORE further usage.

WARNING:

NEVER tape down or defeat pur-

pose and function of lock-off lever.

CAUTION:

Before installing the battery cartridge 

into the tool, always check to see that the switch trigger 

actuates properly and returns to the "OFF" position when 

released.

 Operating a tool with a switch that does not actuate 

properly can lead to loss of control and serious personal injury.

CAUTION:

Never put your finger on the main 

power button and switch trigger when carrying the 

tool.

 The tool may start unintentionally and cause injury.

NOTICE:

Do not pull the switch trigger hard with-

out pressing the lock-off lever. This can cause 

switch breakage.

To prevent the switch trigger from being accidentally 

pulled, a lock-off lever is provided. To start the tool, 

depress the lock-off lever and pull the switch trigger. 

The tool speed increases by increasing pressure on the 

switch trigger. Release the switch trigger to stop.

DUR369A

► 

Fig.8:

1.

 Lock-off lever 

2.

 Switch trigger

DUR369L

► 

Fig.9:

1.

 Lock-off lever 

2.

 Switch trigger

Speed adjusting

You can select the tool speed by tapping the main power 

button. Each time you tap the main power button, the level of 

speed will change. The tool automatically adjusts the rotation 

speed according to the cutting tool attached to the tool.

► 

Fig.10:

1.

 Speed indicator 

2.

 Main power button

Speed 

indicator

Mode

Rotation speed

Cutter blade 

Plastic blade 

(305 mm)

Nylon cutting 

head 

Plastic blade 

(255 mm)

High

0 - 7,000 

min

-1

0 - 5,500 

min

-1

Medium

0 - 5,500 

min

-1

0 - 5,000 

min

-1

Low

0 - 4,600 

min

-1

0 - 4,600 

min

-1

Automatic Torque Drive Technology

When you turn on the Automatic Torque Drive 

Technology (ADT), the tool runs at optimum rotation 

speed and torque for the condition of grass being cut. 

The tool automatically detects the cutting tool attached 

and chooses a suitable rotation speed.
To start ADT, press and hold the reverse button until the 

ADT indicator turns on.

To stop ADT, press and hold the reverse button until the 

ADT indicator turns off.

► 

Fig.11:

1.

 ADT indicator 

2.

 Reverse button

Indicator

Mode

Cutting tool

Rotation 

speed

ADT

Cutter blade 

Plastic blade 

(305 mm)

3,500 - 7,000 

min

-1

Nylon cutting 

head 

Plastic blade 

(255 mm)

3,500 - 5,500 

min

-1

Reverse button for debris removal

WARNING:

Switch off the tool and remove 

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation 

function can not remove.

 Failure to switch off and 

remove the battery cartridge may result in serious 

personal injury from accidental start-up.

This tool has a reverse button to change the direction of 

rotation. It is only for removing weeds and debris entan-

gled in the tool.

To reverse the rotation, tap the reverse button and pull 

the switch trigger while depressing the lock-off lever 

when the cutting tool is stopped. The speed indicators 

and ADT indicator start blinking, and the cutting tool 

rotates in reverse direction when you pull the switch 

trigger.

To return to regular rotation, release the trigger and wait 

until the cutting tool stops.

► 

Fig.12:

1.

 Speed indicator 

2.

 ADT indicator 

3.

 Reverse button

NOTE:

 During the reverse rotation, the tool operates 

only for a short period of time and then automatically 

stops.

NOTE:

 Once the tool is stopped, the rotation returns 

to regular direction when you start the tool again.

NOTE:

 If you tap the reverse button while the cutting 

tool is still rotating, the tool comes to stop and to be 

ready for reverse rotation.

Electric brake

This tool is equipped with an electric brake. If the tool 

consistently fails to quickly stop after the switch trigger 

is released, have the tool serviced at our service center.

CAUTION:

This brake system is not a substi-

tute for the protector. Never use the tool without 

the protector.

 An unguarded cutting tool may result 

in serious personal injury.