Makita DUR369LZ - Инструкция по эксплуатации - Страница 18

18 ENGLISH

Kickback (Blade thrust)

1. 

Kickback (blade thrust) is a sudden reaction 

to a caught or bound cutting blade. Once it 

occurs, the tool is thrown sideway or toward 

the operator at great force and it may cause 

serious injury.

2. 

Kickback occurs particularly when applying 

the blade segment between 12 and 2 o'clock 

to solids, bushes and trees with 3 cm or larger 

diameter.

► 

Fig.2

3. 

To avoid kickback:

1. 

Apply the segment between 8 and 11 

o'clock.

2. 

Never apply the segment between 12 and 

2 o'clock.

3. 

Never apply the segment between 11 and 

12 o'clock and between 2 and 5 o'clock, 

unless the operator is well trained and 

experienced and does it at his/her own risk.

4. 

Never use cutting blades close to solids, 

such as fences, walls, tree trunks and 

stones.

5. 

Never use cutting blades vertically, for 

such operations as edging and trimming 

hedges.

► 

Fig.3

Vibration

1. 

People with poor circulation who are exposed 

to excessive vibration may experience injury 

to blood vessels or the nervous system.

Vibration may cause the following symptoms 

to occur in the fingers, hands or wrists: "Falling 

asleep" (numbness), tingling, pain, stabbing sen-

sation, alteration of skin color or of the skin. If any 

of these symptoms occur, see a physician!

2. 

To reduce the risk of "white finger disease", 

keep your hands warm during operation and 

well maintain the tool and accessories.

Transport

1. 

Before transporting the tool, turn it off and 

remove the battery cartridge. Attach the cover 

to the cutting blade.

2. 

When transporting the tool, carry it in a hori-

zontal position by holding the shaft.

3. 

When transporting the tool in a vehicle, prop-

erly secure it to avoid turnover.

 Otherwise 

damage to the tool and other baggage may result.

Maintenance

1. 

Have your tool serviced by our authorized 

service center, always using only genuine 

replacement parts.

 Incorrect repair and poor 

maintenance can shorten the life of the tool and 

increase the risk of accidents.

2. 

Before doing any maintenance or repair work 

or cleaning the tool, always turn it off and 

remove the battery cartridge.

3. 

Always wear protective gloves when handling 

the cutting blade.

4. 

Always clean dust and dirt off the tool. Never 

use gasoline, benzine, thinner, alcohol or the 

like for the purpose.

 Discoloration, deformation 

or cracks of the plastic components may result.

5. 

After each use, tighten all screws and nuts.

6. 

Do not attempt any maintenance or repair not 

described in the instruction manual. Ask our 

authorized service center for such work.

7. 

Always use our genuine spare parts and 

accessories only.

 Using parts or accessories 

supplied by a third party may result in the tool 

breakdown, property damage and/or serious 

injury.

8. 

Request our authorized service center to 

inspect and maintain the tool at regular 

interval.

9. 

Always keep the tool in good working condi-

tion.

 Poor maintenance can result in inferior per-

formance and shorten the life of the tool.

10. 

Keep handles dry, clean and free from oil and 

grease. Keep all cooling air inlets clear of 

debris.

Storage

1. 

Before storing the tool, perform full cleaning 

and maintenance. Remove the battery car-

tridge. Attach the cover to the cutting blade.

2. 

Store the tool in a dry and high or locked loca-

tion out of reach of children.

3. 

Do not prop the tool against something, such 

as a wall.

 Otherwise it may fall suddenly and 

cause an injury.

First aid

1. 

Always have a first-aid kit close by. 

Immediately replace any item taken from the 

first aid kit.

2. 

When asking for help, give the following 

information:

—  Place of the accident
—  What happened

—  Number of injured persons
—  Nature of the injury

—  Your name

Important safety instructions for 

battery cartridge

1. 

Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery 

charger, (2) battery, and (3) product using 

battery.

2. 

Do not disassemble or tamper with the battery 

cartridge.

 It may result in a fire, excessive heat, 

or explosion.

3. 

If operating time has become excessively 

shorter, stop operating immediately. It may 

result in a risk of overheating, possible burns 

and even an explosion.

4. 

If electrolyte gets into your eyes, rinse them 

out with clear water and seek medical atten-

tion right away. It may result in loss of your 

eyesight.