Sony KV-32FX66K - Инструкция по эксплуатации - Страница 26

26

If you continue to experience problems, have your TV serviced by qualified personnel.

Never open the casing yourself.

Problem

Picture slanted

Noisy picture when viewing 
a TV channel.

No unscrambling or unstable 
picture whilst viewing a 
scrambled channel with a 
decoder connected through 
the Scart connector  

3

/

3

.

• The remote control beeps 

even if you have not 
pressed the remote control 
locator button, or:

• When you press the remote 

control locator button, the 
remote control does not 
beep.

Remote control does not 
function.

The standby indicator 

 on 

the TV flashes.  

S

Solution

• Using the menu system, select the “Picture Rotation” option 

in the “Detail Set Up” menu to correct the picture slant.

• Using the menu system, select the “Manual Programme 

Preset” menu and adjust Fine Tuning (AFT) to obtain better 
picture reception.

• Using the menu system, select the “Noise Reduction” option 

in the “Picture Adjustment” menu and select “Auto” to 
reduce the noise in the picture.

• Using the menu system, select the “Features” menu. Then 

enter to “Detail Set Up” option and set “AV3 Output” to 
“TV”.

• Check that the Decoder is not connected on the scart 

2

/

2

.

• Using the menu system, assign an ID (number) to your remote 

control. (See “Remote Control ID” on page 17).

• Replace the batteries of the remote control and re-assign an ID 

(number) to your remote control. (See “Remote Control ID” 
on page 17).

• Check that the Media Selector on the remote control is set  to 

the device you are using (VCR, TV or DVD).

• If the remote control does not operate the VCR or DVD even 

when the Media Selector has been set correctly. Enter the 
necessary code set as explained in the “Remote Control 
Configuration for VCR/DVD” chapter of this instruction 
manual.

• Replace the batteries.

• Contact your nearest Sony service centre.

Additional Information