Sony KV-32FX66K - Инструкция по эксплуатации - Страница 25

25

GB

Troubleshooting

Here are some simple solutions to problems which may affect the picture and sound.

Additional Information

Problem

No picture (screen is dark) 
and no sound.

Poor or no picture (screen is 
dark), but good sound.

No picture or no menu 
information from equipment 
connected to the Scart 
connector.

Good picture, no sound.

No colour on colour 
programmes.

When you switch on the TV 
the last channel you were 
watching before switching 
the TV off does not appear.

Distorted picture when 
changing programmes or 
selecting teletext.

Distorted picture when 
pressing the Remote Control 
Locator button.

Wrong characters appear 
when viewing teletext.

Wrong characters appear 
when viewing NexTView.

Solution

• Check the aerial connection.
• Plug the TV in and press the 

 button on the front of the TV. 

• If the standby indicator 

 is on, press 

TV

 button on

  the remote control. 

• Using the menu system, select the “Picture Adjustment” 

menu and select “Reset” to return to the factory settings.

• Check that the optional equipment is on and press the
   

 button repeatedly on the remote control until the

  correct input symbol is displayed on the screen. 

• Press the  

 + button on the remote control. 

• Check that “TV Speakers” is “On” in the “Sound Adjustment” 

menu.

• Check that headphones are not connected.

• Using the menu system, select the “Picture Adjustment” 

menu and select “Reset” to return to factory settings.

• This is not a malfunction. Press the number buttons on the 

remote control to select the desired channel.

• Turn off any equipment connected to the Scart connector on 

the rear of the TV.

• This is not a malfunction. It could be caused because some 

broadcast TV uses the same frequency or a frequency close to 
that of the remote control locator. This problem will disappear 
when you stop pressing the button.

• Use the menu systemto enter the “Language/Country” menu 

and select the country in which you operate the TV set. For 
Cyrillic languages, we recommend to select Russia country in 
the case that your own country does not appear in the list.  

• Use the menu systemto enter the “Language/Country” menu 

(see page 14) and select the same language that NexTView is 
broadcast in.

continued...