TP-LINK VIGI NVR1008 - Инструкция по эксплуатации - Страница 25

21

Chapter 2

Configure Your Network Camera

2. 1  Add Cameras to the NVR

VIGI NVR can add cameras singly, in batches or to a certain screen. You can also manually add cameras 
by entering their IP addresses and passwords. The processes vary depending on whether the camera 
has a password and whether Plug and Play is enabled. TP-Link security cameras have no passwords in 
default settings.
Choose one of the methods below and follow the steps to add your cameras:

■

Add Cameras Singly or in Batches

■

Add a Camera to a Certain Screen

■

Add Cameras Manually

When adding TP-Link security cameras, the NVR will automatically modify the IP addresses to ensure 
every camera has a unique IP address and they are in the same subnet as your NVR. To add cameras 
from other brands, it is recommended to refer to their user guides before adding. If the cameras cannot 
be automatically found by the NVR, refer to 

2. 1. 3 Add Cameras Manually.

2. 1. 1 

Add Cameras Singly or in Batches

To add cameras without passwords, refer to 

Add Cameras without Passwords

. To add cameras with 

passwords, refer to 

Add Cameras with Passwords

.

Note: 

If you forget the camera’s password, refer to 

FAQ

 to reset the password.

Add Cameras without Passwords

■

When Plug and Play Enabled

After you connect the cameras to the network device, stay in the Live View screen and wait for the NVR 
to add the cameras. If detecting that the cameras are not in the same subnet, the NVR will automatically 
modify the IP addresses of your cameras . Click 

Add

 to add the cameras.