Stanley SCH201D2K - Инструкция по эксплуатации - Страница 8

ENGLISH  

(Original instructions)

8

Storage Recommendations

1.  The best storage place is one that is cool and dry 

away from direct sunlight and excess heat or cold. For 

optimum battery performance and life, store battery 

packs at room temperature when not in use. 

2.  For long storage, it is recommended to store a fully 

charged battery pack in a cool, dry place out of the 

charger for optimal results.

NOTE:

 Battery packs should not be stored completely 

depleted of charge. The battery pack will need to be recharged 

before use.

Labels on Charger and Battery Pack

In addition to the pictographs used in this manual, the 

labels on the charger and the battery pack may show the 

following pictographs:

   Read instruction manual before use.

 See 

Technical Data

 for charging time.

100%

  Battery charging.

100%

 Battery charged.

 Battery defective.

 Hot/cold pack delay.

 Do not probe with conductive objects.

   Do not charge damaged battery packs.

  Do not expose to water. 

  Have defective cords replaced immediately.

  Charge only between 4 ˚C and 40 ˚C.

  Only for indoor use.

   Discard the battery pack with due care for the 

environment.

SC201

   Charge  S

T

ANLEY battery packs only with 

designated S

T

ANLEY chargers. Charging battery 

packs other than the designated S

T

ANLEY 

batteries with a S

T

ANLEY charger may make 

them burst or lead to other dangerous situations.

   Do not incinerate the battery pack.

Package Contents

The package contains:
1    Hammer drill
1   Charger
2     Batteries (C2/D2) or 1 Battery (C1/D1)
1    Instruction manual

NOTE

: Battery packs and chargers are not included with 

N-models.
• Check for damage to the tool, parts or accessories which may 

have occurred during transport.

  •  Take the time to thoroughly read and understand this 

manual prior to operation.

STORAGE RECOMMENDATIONS

1.

 The best storage place is one that is cool and dry away 

from direct sunlight and excess heat or cold.

2. Long storage will not harm the battery pack or charger.

FEATURES (Fig. A)

1. 

Trigger Switch

2. 

Forward/Reverse Button

3. 

Torque Adjust Collar

4. 

Dual Range Gear Selector

5. 

Keyless Chuck

6. 

Battery

7. 

Battery Release Button

8. 

LED Work Light

9.

 Bit Tip Holder

INTENDED USE

This hammer drill is designed for light fastening and drilling 

applications. 

DO NOT 

use under wet conditions or in presence of 

flammable liquids or gases.
This hammer drill is a professional power tool. 

DO NOT

 let children come into contact with the tool. 

Supervision is required when inexperienced operators use 

this tool.
  •  This product is not intended for use by persons (including 

children) suffering from diminished physical, sensory or