Stanley SCH201D2K - Инструкция по эксплуатации - Страница 4

ENGLISH  

(Original instructions)

4

Intended use

Your Stanley Hammer drill SCH20 / SCH201 has been 

designed for drilling in concrete, metal, wood and screwdriving 

applications. This tool is intended for professional use.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions listed below may result in electric 

shock, fire and/or serious injury.

Save all warnings and instructions for future 

reference.

The term “power tool” in the warnings refers to your 

mainsoperated (corded) power tool or battery-operated 

(cordless) power tool.

1.  Work area safety

a.   Keep work area clean and well lit. 

Cluttered or dark 

areas invite accidents.

b.   Do not operate power tools in explosive 

atmospheres, such as in the presence of flammable 

liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

c.   Keep children and bystanders away while operating 

a power tool. 

Distractions can cause you to lose 

control.

2. Electrical safety

a.   Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapter 

plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk 

of electric shock.

b.   Avoid body contact with earthed or grounded 

surfaces such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c.   Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will increase 

the risk of electric shock.

d.   Do not abuse the cord. Never use the cord for  

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or 

moving parts. 

Damaged or entangled cords increase 

the risk of electric shock.

e.   When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of a 

cord suitable for outdoor use reduces the risk of electric 

shock.

f.   If operating a power tool in a damp location is 

unavoidable, use a residual current device (RCD) 

protected supply. 

Use of an RCD reduces the risk of 

electric shock.

3.  Personal safety

a.   Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication.  

A moment of inattention while operating power tools 

may result in serious personal injury.

b.   Use personal protective equipment. Always wear 

eye protection. 

Protective equipment such as dust 

mask, non-skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries.

c.   Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool. 

Carrying power tools with your finger on the 

switch or energising power tools that have the switch on 

invites accidents.

d.   Remove any adjusting key or wrench before turning 

the power tool on. 

A wrench or a key left attached to 

a rotating part of the power tool may result in personal 

injury.

e.   Do not overreach. Keep proper footing and balance 

at all times. 

This enables better control of the power 

tool in unexpected situations.

f.   Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves away 

from moving parts. 

Loose clothes, jewellery or long 

hair can be caught in moving parts.

g.   If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 

are connected and properly used. 

Use of dust 

collection can reduce dust-related hazards.

4.  Power tool use and care

a.   Do not force the power tool. Use the correct power 

tool for your application. 

The correct power tool will 

do the job better and safer at the rate for which it was 

designed.

b.   Do not use the power tool if the switch does not 

turn it on and off. 

Any power tool that cannot be 

controlled with the switch is dangerous and must be 

repaired.

c.   Disconnect the plug from the power source and/or 

the battery pack from the power tool before making 

any adjustments, changing accessories, or storing 

power tools. 

Such preventive safety measures reduce 

the risk of starting the power tool accidentally.