Stanley SCH201D2K - Инструкция по эксплуатации - Страница 11

ENGLISH  

(Original instructions)

11

Drilling in metal

Use a cutting lubricant when drilling metals. The exceptions 

are cast iron and brass which should be drilled dry. The 

cutting lubricants that work best are sulfurized cutting oil 

or lard oil.

LED work light

When drill is activated by pulling the trigger switch 

(1)

, the 

integrated LED work light 

(8)

 will automatically illuminate 

the work area.  

Note: 

The work light is for lighting the immediate work 

surface and is not intended to be used as a flashlight.

Bit tip storage

A bit storage slot 

(9) 

is built into the base of the tool.

MAINTENANCE 

Use only mild soap and damp cloth to clean the tool. Never 

let any liquid get inside the tool; never immerse any part of 

the tool into a liquid.

@

Important! 

To ensure product

 SAFETY

and 

RELIABILITY,

 repairs, maintenance 

and adjustment (other than those listed 

in this manual) should be performed by 

authorized service centers or other quali-

fied organizations, always using identical 

replacement parts. Unit contains no user 

service able parts inside.

ACCESSORIES

@

Warning! 

Since accessories, other than 

those offered by STANLEY have not been 

tested with this product, use of such acces-

sories with this tool could be hazardous. 

To reduce the risk of injury, only

STANLEY 

recommended accessories should be used 

with this product.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be 

disposed of with normal household waste.

Should you find one day that your STANLEY prod-

uct needs replacement, or if it is of no further use 

to you, do not dispose of it with household waste. 

Make this product available for separate collection.

STANLEY provides a facility for the collection and 

recycling of STANLEY products once they have 

reached the end of their working life. To take 

advantage of this service please return your product to any 

authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised 

repair agent by contacting your local STANLEY office at 

the address indicated in this manual. Alternatively, a list 

of authorised STANLEY repair agents and full details of 

our after-sales service and contacts are available on the 

Internet at: www.2helpU.com.

BATTERIES

STANLEY batteries can be recharged many times. 

At the end of their useful life, discard batteries with 

due care for our environment: 

♦

Run the battery down completely, then remove it from 

the tool.

♦

NiCd, NiMH and Li-Ion batteries are recyclable. 

Take them to any authorized repair agent or a local 

recycling station. 

REMARKS

Stanley’s policy is one of continuous improvement to our 

products and as such, we reserve the right to modify product 

specifications without prior notice.

♦

Standard equipment and accessories may vary by 

country.

♦

 Product specifications may differ by country.

♦

 Complete product range may not be available in all 

countries. Contact your local Stanley dealers for range 

availability.