Шлифмашины Bosch PWS 8 125 CE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
English - 4
■
Before any work on the machine itself, pull
the mains plug.
Protection Guard
■
For work with grinding or cutting discs, the
protection guard 6 must be mounted.
Open the clamping lever 7.
Place the protection guard 6 onto the spindle col-
lar of the machine head as shown in the illustra-
tion. The encoding keys of the protection guard
must match with the respective recesses on the
spindle collar.
Press the protection guard onto the spindle collar
until the collar of the protection guard faces
against the flange of the machine and the encod-
ing keys engage in the circular groove at the spin-
dle collar.
Rotate the protection guard 6 in clockwise direc-
tion to the required position (working position).
Adjust the protection guard 6 in such a man-
ner that sparks are not emitted in the direc-
tion of the operator.
Note: Encoding keys on the protection guard 6
ensure that only a protection guard that fits the
machine type can be mounted.
Disassemble in the reverse sequence.
Auxiliary Handle
■
For all work with the machine, the auxiliary
handle 3 must be mounted.
Screw the auxiliary handle 3 on the right or left of
the machine head depending on the working
method.
Vibration-dampening Auxiliary Handle
The vibration-dampening auxiliary handle re-
duces the vibrations, making operation more
comfortable and secure.
Do not make any alterations to the aux-
iliary handle.
Do not continue to use an auxiliary handle if it is
damaged.
Hand Guard
For work with the rubber sanding pad 13 or with
the cup brush 16 / disc brush / flap disc, mounting
the hand guard 12 (accessory) is recommended.
The hand guard 12 is fastened with the auxiliary
handle 3.
■
Before any work on the machine itself, pull
the mains plug.
Use only grinding tools with a permissi-
ble speed at least as high as the no-load
speed of the machine.
Grinding and cutting discs become very
hot while working; do not touch until
they have cooled.
■
Clean the grinder spindle and all parts to be
mounted. For clamping and loosening the
grinding tools, lock the grinder spindle 5 with
the spindle lock button 4.
Actuate the spindle lock button 4 only when
the grinder spindle is at a standstill!
Mounting the
Protective Devices
6
7
6
7
Mounting the Grinding Tools
17 • 1 609 929 F32 • 03.06
