Yamaha BD-S1067 - Инструкция по эксплуатации - Страница 74

SETUP MENU

29

 En

SETTINGS

4

Eng

lish

■

General Setting

The default settings are marked with “ 

*

”.

System

Screen Saver

You can set the screen saver to on/off.
When set to on, this Player will switch to screen saver 
mode if there is no operation for 3 minutes. After that, this 
Player will turn to standby mode when there is no 
operation for 6 minutes.

On

*

, Off

Disc Auto Playback

You can set Disc Auto Playback to on/off. When set to on, 
a disc will play back automatically after loading.

On

*

, Off

HDMI Control

You can set the Player to receive control signal from a 
TV/AV receiver compatible with the HDMI Control 
function via an HDMI cable (p. 12).

On, Off

*

Network Control

You can set control via Ethernet to on/off. This player 
employs Yamaha Network Control protocol (YNC).

On, Off

*

– When set to on, power consumption during standby 

mode increases due to network control function.

– When set to on, the system startup time is increased.

Load Default

You can reset all settings of this Player to default setting 
except Security setting (p. 30). For details on default 
settings, see pages 26-33.

Upgrade

You can upgrade the software manually from Disc, USB 
Storage or Network. For details on software upgrade, refer 
to “SOFTWARE UPGRADE” (p. 36).

Easy Setup

You can perform Easy Setup (p. 18).

Local Storage

You can display Local Storage information, format Local 
Storage, and select Front USB/Rear USB to save the BD-
Live data.
To format (empty) the BUDA folder in the USB memory 
device, select Information and press 

ENTER

 when 

“Format” is focused on the screen.

Front USB, Rear USB

*

Using HDMI Control function

Using the HDMI Control function, you can interactively 
operate this Player with your TV (HDMI Control 
function supported).
When you connect this Player to the TV compatible with 
the HDMI Control function using an HDMI cable and 
set HDMI Control in the SETUP menu to on (p. 29), you 
can perform the function listed below.

• Automatic input select function

When you start playback of this Player, the input 
selector of the TV (and an AV receiver if this Player is 
connected to the TV via the AV receiver) is switched 
to this Player automatically. TV Power is turned on 
automatically depending on the TV.

• Automatic power off function

When you turn off the TV while this Player is in stop 
mode and the SETUP menu screen is not displayed, 
the power of this Player is also turned off 
automatically. 

– HDMI Control function may not work properly 

depending on the TV.

– Functions other than ones shown above may work 

depending on the TV or AV receiver.

– In order to make the HDMI Control function 

available, set up settings for the HDMI Control 
function on ALL components (this Player, TV, 
and AV receiver). Certain operation may also be 
required.

– Each function may be set independently to 

activate/deactivate depending on the TV.

– Refer to the operation manuals supplied with the 

TV and/or AV receiver for details regarding setup.

Notes

Notes

Local Storage

It is used as an auxiliary memory when Blu-ray Disc is 
played back.