Yamaha BD-S1067 - Инструкция по эксплуатации - Страница 78

SETUP MENU

33

 En

SETTINGS

4

Eng

lish

■

Audio Setting

The default settings are marked with “ 

*

”.

Audio Output

Coaxial/Optical

You can select the output mode of COAXIAL jack and 
OPTICAL terminal. For more details on output formats, 
refer to “About the audio output formats” (p. 34).

HDMI

You can select the output mode of HDMI ternminal. For 
details on setting items, see “Coaxial/Optical” (p. 33). For 
more details on output formats, refer to “About the audio 
output formats” (p. 34).

Bitstream

*

, PCM, Reencode, Off

– To output HD audio (such as Dolby TrueHD or 

DTS-HD Master Audio) from HDMI terminal, set 
Resolution to Auto or more than 720p (p. 31).

Downsampling

You can select digital audio signal down-sample 
frequency. This function is effective for the audio signal 
output from the COAXIAL jack/OPTICAL terminal.

DRC

You can set the DRC (Dynamic Range Compression) 
(p. 40) to on/off/Auto. When set to Auto, DRC is 
automatically turned on for a source with DRC 
information in Dolby TrueHD format. DRC makes the 
strong sound such as plosive sound lower, and 
conversations more audible. It is useful when you watch 
movies in the night.

Off

*

, On, Auto

SACD Output

SACD Priority

You can select a content played back from multi-channel 
or stereo (2-channel) contents when a Hybrid SA-CD 
(p. 4) including both is loaded.

Multi-ch

*

, 2-ch

HDMI Output

You can select audio signal output from HDMI terminal 
when SA-CD is played back.

Speaker Setting

Configuration

You can set the output of 7.1 ch surround depending on 
the connected speaker or amplifier.

1

Press 

5

/

a

 to select a speaker you want to configure, 

then press 

ENTER

. 

2

Adjust the figures below. Note that some of items are 
not displayed depend on the selected speaker.

3

Press 

RETURN

 to go back to speaker selection.

2ch Downmix

You can select down mix method to analog 2-ch from 
Stereo or Lt/Rt.

Post Process

You can multi-channelize the 2-channel audio signal. To 
multi-channelize, select NEO6, then select Cinema or 
Music mode.

Off

*

, NEO6

■

System Information

Software version and MAC address (p. 41) are displayed.

Bitstream

Outputs digital signal without any processing. 
Secondary Audio is not output.

PCM

Outputs 2-channel PCM.

Reencode

*

Outputs Bitstream with Secondary Audio. The audio 
signal is output in DTS signal.

Off

Mutes sound.

Note

48k

*

The highest sampling rate of digital PCM output is 
48 kHz.

96k

The highest sampling rate of digital PCM output is 
96 kHz.

192k

The highest sampling rate of digital PCM output is 
192 kHz.

DSD

*

Outputs DSD raw signal. When this Player is 
connected to DSD compatible AV receiver, this item 
is recommended.

PCM

Outputs PCM signal decoded by this Player.

Size

When the woofer section of a speaker is 16 cm (6-1/
2 in) or larger, select Large. When smaller than 16 
cm (6-1/2 in), select Small.

Large

*

, Small

Trim

-12 to 0 dB (in 0.5 dB step)

The default setting is 0 dB.

Delay

0.5 to 10 m (in 0.5 m step)

The default setting is 3 m.

Disable

When selected speaker is not in use, select Yes.

Yes, No

*

Stereo

*

Changes channel output to stereo, which only 
delivers sound from the two front speakers.

Lt/Rt

Select this item if this unit is connected to a Dolby 
Pro Logic decoder. Sound from rear speakers is 
mixed to the 2 ch stereo sound.