Плита Electrolux EKK 603504 X - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
electrolux
13
5
1
2
3
6
7
8
The oven will only work if the time
of day has been set.
However, the oven can also be
operated without any programme.
Setting the time of day
When the power supply is switched
on, or after a power failure, the “Time of
d a y ” p i l o t l a m p
w i l l f l a s h o n t h e
display.
To set the correct time of day:
To set the correct time of day:
To set the correct time of day:
To set the correct time of day:
To set the correct time of day:
1.
Press button or .
2.
After the setting is carried out, wait
for 5 seconds: the “Time of day” pilot
lamp
will go out and the display
will show the set time. The appliance
is ready for use.
To reset the correct time of day:
To reset the correct time of day:
To reset the correct time of day:
To reset the correct time of day:
To reset the correct time of day:
1.
Press button
repeatedly to select
the “Time of day” function. The rel-
evant pilot lamp will start flashing.
Then proceed as described above.
The time of day can only be reset if
no automatic function (cook duration
or end of cooking
) has been
set .
Electronic programmer
4
1.
Push button for selecting a function
2.
Decreasing control button
“ ”
3.
Increasing control button
“ ”
4.
Display
5.
“Cooking Duration” pilot lamp
6.
“End of cooking” pilot lamp
7.
“Minute minder” pilot lamp
8.
“Time of day” pilot lamp
In the event of a power failure, all
t h e s e t t i n g s ( t i m e o f d a y,
programme setting or programme
in operation) will be cancelled.
When the power is restored, the
numbers in the display will flash,
and the clock/timer has to be
reset.
