Bosch GKS 18V-57 - Инструкция по эксплуатации - Страница 22

22

 | English

1 609 92A 4LL | (18.10.2018)

Bosch Power Tools

The guide rail

(34)

must not protrude over the edge of

the workpiece being sawn into

.

Switch on the power tool and push it gently in the cutting dir-

ection, guiding it evenly.
The connector 

(36)

 can be used to join two guide rails. The

four screws in the connector are used for the purpose of

clamping.

Recommendations for Optimal Handling of the Battery

Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to

50 °C. Do not leave the battery in your car in the summer, for

example.
Occasionally clean the ventilation slots on the battery using a

soft brush that is clean and dry.
A significantly reduced operating time after charging indic-

ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.

Maintenance and Servicing

Maintenance and Cleaning

u

Remove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage.

 There is risk of injury

from unintentionally pressing the on/off switch.

u

To ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

The retracting blade guard must always be able to move

freely and retract automatically. It is therefore important to

keep the area around the retracting blade guard clean at all

times. Remove dust and chips with a paintbrush.
Non-coated saw blades can be protected against corrosion

using a thin layer of acid-free oil. Remove the oil again before

sawing as failure to do so will stain the wood.
Resin or glue residue on the saw blade has a detrimental ef-

fect on the quality of the cut. You should therefore clean saw

blades straight after use.

After-sales service and advice on using products

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare

parts. You can find explosion drawings and information on

spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you

with any questions about our products and their accessor-

ies.
In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.) 

P.O. Box 98 

Broadwater Park 

North Orbital Road 

Denham Uxbridge

UB 9 5HJ 

At 

www.bosch-pt.co.uk

 you can order spare parts or ar-

range the collection of a product in need of servicing or re-

pair. 

Tel. Service: (0344) 7360109 

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd. 

Unit 23 Magna Drive 

Magna Business Park 

City West 

Dublin 24 

Tel. Service: (01) 4666700 

Fax: (01) 4666888

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd. 

Power Tools 

Locked Bag 66 

Clayton South VIC 3169 

Customer Contact Center 

Inside Australia: 

Phone: (01300) 307044 

Fax: (01300) 307045
Inside New Zealand: 

Phone: (0800) 543353 

Fax: (0800) 428570
Outside AU and NZ: 

Phone: +61 3 95415555 

www.bosch-pt.com.au 

www.bosch-pt.co.nz

Republic of South Africa
Customer service

Hotline: (011) 6519600

Gauteng – BSC Service Centre

35 Roper Street, New Centre 

Johannesburg 

Tel.: (011) 4939375 

Fax: (011) 4930126 

E-mail: bsctools@icon.co.za

KZN – BSC Service Centre

Unit E, Almar Centre 

143 Crompton Street 

Pinetown 

Tel.: (031) 7012120 

Fax: (031) 7012446 

E-mail: bsc.dur@za.bosch.com

Western Cape – BSC Service Centre

Democracy Way, Prosperity Park 

Milnerton 

Tel.: (021) 5512577 

Fax: (021) 5513223 

E-mail: bsc@zsd.co.za

Bosch Headquarters

Midrand, Gauteng 

Tel.: (011) 6519600