Bosch GBH 5-38 D - Инструкция по эксплуатации - Страница 11

 English | 

11

Bosch Power Tools

1 609 92A 2AB | (17.6.16)

used for appropriate conditions will reduce personal inju-
ries.



Prevent unintentional starting. Ensure the switch is in 
the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.



Remove any adjusting key or wrench before turning 
the power tool on. 

A wrench or a key left attached to a ro-

tating part of the power tool may result in personal injury.



Do not overreach. Keep proper footing and balance at 
all times. 

This enables better control of the power tool in 

unexpected situations.



Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from 
moving parts. 

Loose clothes, jewellery or long hair can be 

caught in moving parts.



If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. 

Use of dust collection can re-

duce dust-related hazards.

Power tool use and care



Do not force the power tool. Use the correct power tool 
for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.



Do not use the power tool if the switch does not turn it 
on and off. 

Any power tool that cannot be controlled with 

the switch is dangerous and must be repaired.



Disconnect the plug from the power source and/or the 
battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. 

Such preventive safety measures reduce the risk of 

starting the power tool accidentally.



Store idle power tools out of the reach of children and 
do not allow persons unfamiliar with the power tool or 
these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.



Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If 
damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 
tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Hammer Safety Warnings



Wear ear protectors. 

Exposure to noise can cause hear-

ing loss.



Use auxiliary handle(s), if supplied with the tool. 

Loss 

of control can cause personal injury.



Hold the tool by the insulated gripping surfaces when 
performing operations where the application tool or 
the screw could contact hidden wiring or its own power 
cord. 

Contact with a “live” wire will also make exposed 

metal parts of the power tool “live” and shock the operator.



Use suitable detectors to determine if utility lines are 
hidden in the work area or call the local utility company 
for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage or 
may cause an electric shock.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Products sold in GB only:

 Your product is fitted with a 

BS 1363/A approved electric plug with internal fuse 
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should 
be cut off and an appropriate plug fitted in its place by an 
authorised customer service agent. The replacement plug 
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible 
shock hazard and should never be inserted into a mains 
socket elsewhere.

Products sold in AUS and NZ only:

 Use a residual current 

device (RCD) with a rated residual current of 30 mA or 
less.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for hammer drilling in concrete, 
brick and stone as well as for chiselling.

OBJ_BUCH-273-005.book  Page 11  Friday, June 17, 2016  11:40 AM