Tefal CY625F32 - Инструкция по эксплуатации - Страница 106

106

TROUBLESHOOTING AND REPAIR

Problem

Possible reasons

Solutions

Unable to open lid.

Unable to open because of 
pressure in the cooking pot.

a.  Wait for the pressure in the 

pot to be completely released 
automatically. 

b.  Press and hold the Quick 

Exhaust button.

Pressure in the pot is fully 
released but the float valve 
is stuck because it is too 
dirty, and therefore unable 
to fall. 

a)  Once the product is cold, press 

the external part of the float 
valve - 

51.

b.  For next use, please clean and 

wipe the float valve - 

41-42

. 

Unable to close lid.

The float valve is stuck 
because it is too dirty, and 
therefore unable to fall. 

a)  Once the product is cold, press 

the external part of the float 
valve - 

51

.

b.  For next use, please clean and 

wipe the float valve - 

41-42

. 

Direction at which lid was 
closed is incorrect. 

Close lid in the correct direction 
according to the instruction 
manual. 

be unscrewed to be cleaned, and the duct cover should be checked 
regularly to prevent blockage 

- 43

. Press on the internal part of the 

safety spring valve to check that it is not clogged – 

44

.

– Remove the cooking pot from the appliance, rinse it and dry it off 

thoroughly. Do not use a scourer as this can damage the non stick 
coating in the pot - 

47

.

– Do not immerse the appliance in water or pour water into it, clean the 

housing with a damp cloth - 

48-49 

.

• Once all the components you just cleaned are perfectly dried, place 

them all in their original position. - 

50

.

• Always use the cooking pot provided. 
• Do not pour water or food directly into the appliance. If you inadvertently 

immerse your appliance in water or spill water directly on the heating 
element (when the pot is not in place), take it to your service center for 
repair. 

• Change the sealing gasket every 2 years