Tefal CY625F32 - Инструкция по эксплуатации - Страница 105

105

EN

• To turn OFF your appliance, make a long press 5 seconds on the button 

ON/OFF, Start/Stop.

• A short press on   will start the selected cooking mode when all the 

desired parameters have been entered. When the appliance enters into 
a cooking preheat, the digital screen display 

 (except for Bake, 

Dessert, Frying, and DIY functions , for those the count down will start 
immediately after pressing start button.). When the temperature for 
cooking is reached, the appliance switches automatically to cooking 
phase, and the time previously set starts counting down. 

• During the cooking mode, another short press allows to stop the cooking 

then the product comes back to the standby mode. 

• We have a short beep associated with the Start, and a long beep sound 

associated with the Stop. 

• It is also possible to stop the cooking with a short press on cancel button. 
• If the product is in stand by mode, a long press on the Start/Stop key 

will shut down completely the product, lights and screen will cut out. If 
the product is shut off a short press will switch on the product then the 
product is in stand by mode. 

• It is recommended to clean your appliance after each use. Before 

cleaning let your appliance cool down for at least 2 hours -

30

.

• You can only wash the accessoiries in the dishwasher -

31

. Do not put the 

appliance or cooking pot or inner lid into the dishwasher -

32

:

– Remove the condensation collector, place in the dishwasher. - 

33

. 

– Before placing the steam cover in the dishwasher you need to separate 

it in two parts. -

34 -35

 .

– Remove the pressure limit valve to clean it, rinse it under water and 

dry-

36

. 

– To clean the inner lid, you need to detach it from the appliance and 

clean all its components. First unscrew the inner lid fixation nut, pull 
on the peak in the middle, and push the duct pressure limit valve cover 
to help you remove it.- 

37 -38.

– Then you can rinse the inner lid with clear water.

- 40

 The float valve 

should be dismantled by removing the small silicone gasket, then 
turn the inner lid to get the float valve 

- 41-42

. The duct cover can 

CLEANING AND MAINTENANCE