Мойки высокого давления Makita HW 140 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

12
English
1
SAFETY INSTRUCTIONS
1.1
The appliance you have purchased is a technologically advanced 
product designed by one of the leading European manufacturers 
of high pressure pumps. To obtain the best performance from your 
unit, read this booklet carefully and follow the instructions each 
time you use it. We congratulate you on your choice and wish you 
successful operation.
2
SAFETY RULES/RESIDUAL RISKS
2.1
SAFETY “MUST NOTS”
2.1.1
DO NOT use the appliance with 
inflammable or toxic liquids, or 
any products which are not compatible with the correct operation 
of the appliance. 
E
XPLOSION
OR
POISONING
HAZARD
2.1.2
DO NOT direct the water jet towards people or 
animals. 
I
NJURY
HAZARD
2.1.3
DO NOT direct the water jet towards the unit 
itself, electrical parts or towards other electrical 
equipment.
E
LECTRIC
SHOCK
HAZARD
2.1.4
DO NOT use the appliance outdoors in case of rain.
S
HORT
CIRCUIT
HAZARD
2.1.5
DO NOT allow children or incompetent persons to use the 
appliance. 
I
NJURY
HAZARD
2.1.6
DO NOT touch the plug and/or socket with wet 
hands. 
E
LECTRIC
SHOCK
HAZARD
2.1.7
DO NOT use the appliance if the electrical cable is 
damaged. 
E
LECTRIC
SHOCK
AND
SHORT
CIRCUIT
HAZARD
2.1.8
DO NOT use the appliance if the high pressure 
hose is damaged. 
E
XPLOSION
HAZARD
2.1.9
DO NOT jam the trigger in the operating position.
A
CCIDENT
HAZARD
2.1.10
Check that the data plates are affixed to the appliance, if 
not, inform your dealer. Units without plates must NOT 
be used as they are unidentifiable and potentially dangerous.
A
CCIDENT
HAZARD
2.1.11
DO NOT tamper with or adjust the setting of the 
safety valve or the safety devices. 
E
XPLOSION
HAZARD
2.1.12
DO NOT alter the original diameter of the spray head 
nozzle. 
H
AZARDOUS
ALTERATION
OF
OPERATING
PERFORMANCE
2.1.13
DO NOT leave the appliance unattended.
A
CCIDENT
HAZARD
2.1.14
DO NOT move the appliance by pulling on the
ELECTRICAL CABLE
.
S
HORT
CIRCUIT
HAZARD
2.1.15
Make sure that cars do not drive over the high pressure hose.
2.1.16
DO NOT move the appliance by pulling on the high pressure hose.
E
XPLOSION
HAZARD
2.1.17
When directed towards tyres, tyre valves or other pressurised 
components, the high pressure jet is potentially dangerous. Do not 
use the rotating nozzle kit, and always keep the jet at a distance of 
at least 30 cm during cleaning. 
E
XPLOSION
HAZARD
2.2
SAFETY “MUSTS”
2.2.1
All electrical conductors MUST BE PROTECTED against the 
water jet. 
S
HORT
CIRCUIT
HAZARD
2.2.2
The appliance MUST ONLY BE CONNECTED to an 
adequate power supply in compliance with all 
applicable regulations (IEC 60364-1).
E
LECTRIC
SHOCK
HAZARD
The appliance may cause network noise DURING startup.
• Use of a safety residual current circuit-breaker (R.C.C.B.) will
provide additional protection for the operator (30 mA).
Models supplied without plug must be installed by qualified staff.
Use only authorized electrical extension leads with suitable 
conductor gauge.
2.2.3
High pressure may cause parts to rebound: wear all the protective 
clothing and equipment needed to ensure the operator’s safety. 
I
NJURY
HAZARD
2.2.4
Before doing work on the appliance, REMOVE the plug.
A
CCIDENTAL
START
-
UP
HAZARD
2.2.5
Before pressing the trigger, GRIP the gun firmly to 
counteract the recoil. 
I
NJURY
HAZARD
2.2.6
COMPLY WITH the requirements of the local water 
supply company. According to EN 12729 (BA), the 
appliance may only be connected to the mains drinking water 
supply if a backflow preventer valve with drain facility is installed in 
the supply hose. 
C
ONTAMINATION
HAZARD
2.2.7
Maintenance and/or repair of electrical components 
MUST be carried out by qualified staff. 
A
CCIDENT
HAZARD
2.2.8
DISCHARGE residual pressure before disconnecting the 
unit hose. 
I
NJURY
HAZARD
2.2.9
Before using the appliance, CHECK every time that the 
screws are fully tightened and that there are no broken or 
worn parts.
A
CCIDENT
HAZARD
2.2.10
ONLY USE detergents which will 
not corrode the coating materials 
of the high pressure hose/electrical cable.
E
XPLOSION
AND
ELECTRIC
SHOCK
HAZARD
2.2.11
ENSURE that all people or animals keep a 
minimum distance of 16 yd. (15m) away. 
I
NJURY
HAZARD

 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
 











