IPC Portotecnica ATOMAX-C D 1813 P 40964 IDAF - Инструкция по эксплуатации - Страница 21

English

- 21 -

WATER CIRCUIT CONNEC-

TION

Connect the feed hose to 

the  mains  (fig.  4A)  and  to 

the hosetail on the cleaner 

(fig. 4B). 

Check that the pressure and 

quantity of the water supplied 

by the mains are sufficient for 

the cleaner to work properly: 2 

to 8 BAR (29 to 116 PSI).

Maximum temperature of fee

-

ding water 50°C (122°F).

Connect the high pressure 

hose  to  the  cleaner  (fig.  4C) 

and to the lance (fig. 5). 

Danger

The  cleaner  must  operate 

with  clean  water.  Dirty  or 

sandy water, corrosive che

-

micals and solvents can 

cause severe damage to 

the cleaner.

Danger

Never suck up liquids contai-

ning solvents or acids in the 

pure state, for example petrol, 

paint solvents or diesel. The 

spray mist from the lance is 

highly inflammable, explosive 

and poisonous.

Failure to respect the above 

absolves the manufacturer of 

all liability and represents ne-

gligent use of the product.

ELECTRICAL CONNECTION

Connection of the cleaner to the mains must be carried out by 

skilled technicians able to ensure that all regulations in force 

are complied with 

use in respect of current standards and 

legislation.  

Ensure that the mains voltage available is the same as the vol-

tage at which the cleaner is supposed to work; this is indicated 

on the identification plate.

Danger

- The electric cable must be protected from accidental cru-

shing.

- Do not use the machine if the supply cable is damaged.

- The use of any electric appliance requires the respect of 

some basic rules:

• Do not touch the appliance with wet or damp hands or feet.

• Do not use the appliance bare-footed or with unsuitable  

clothing.

• Do not pull the supply cable or the appliance itself in order 

to   disconnect the plug from the electric supply.   (For water 

cleaners rated at less than 3 kW fitted with plug).

As for the protection against electric shock, the H.P.cleaner 

belongs to 

CLASS I.

Failure to observe the above warning frees the manufac

-

turer from all responsibility and constitutes negligent use 

of the product.

FIG. 5

!

!

!

Information

Respect the instructions provided by the water    

utility company.

Current regulations specify that the appliance may not be con-

nected to the drinking water supply unless a suitable system 

separator is fitted.

Use a suitable EN 12729 type BA system separator.

Water passing through a system separator is no longer classi-

fied as drinking water.

Warning

Do not connect the machine to a drinking water container.

!

FIG. 4

A

B

C