IPC Portotecnica ATOMAX-C D 1813 P 40964 IDAF - Инструкция по эксплуатации - Страница 20

English

- 20 -

Warning

When  buying  your  cleaner,  ensure  that  it  has  an  identifi

-

cation plate.  If there is no plate, inform the manufacturer 

and/or  the  dealer  immediately.    Machines  without  a  plate 

must  not  be  used  and  the  manufacturer  declines  all  re

-

sponsibility  for  them.    Products  without  a  plate  must  be 

considered anonymous and potentially dangerous.

PRELIMINARY OPERATIONS

UNPACKING

After unpacking, ensure that the cleaner is undamaged.

If in doubt, do not use the machine.

Contact your dealer.

Packaging (bags, boxes, nails, etc) is potentially dangerous and 

should be kept out of reach of children. It should be disposed of 

or retained in respect of national environmental legislation.

FITTING THE SEPARATE PARTS OF THE MACHINE

All the fundamental parts and safety devices of the machine are 

assembled by the manufacturer.

For reasons of packing and transport, some secondary cleaner 

parts are supplied separately.

The  user  must  fit  these  parts  as  explained  in  the  instructions 

supplied in each assembly kit.

DATA PLATE:

The data plate bearing the 

main technical characteristics 

of your cleaner is located on 

the trolley and is always visible 

(fig. 1).

COMMAND AND CONTROL DEVICES

Before connecting the machine to the water supply and to the 

power mains, it is essential to know the function of the cleaner's 

command and control devices.

FIG. 1

FIG. 3

FIG. 2

FILLING THE DETERGENT 

TANK

.

(Optional accessory)

From the range of recommen-

ded products, choose the one 

most suited to the washing job 

to  be  done  (fig.  2)  and  dilute 

it with water according to the 

instructions on the pack.

Fill the detergent tank with 

the diluted product (fig. 3). 

Ask your dealer for the cata-

logue of the detergents that 

can be used depending on 

the type of washing job to be 

done and the type of surface 

to be treated.

After using a detergent, the 

detergent intake circuit must 

be flushed out with clean water 

(fig. 8).

!

INTENDED USE

This appliance is intended exclusively for cleaning machines, 

vehicles, buildings and general surfaces suitable for treatment 

with a high pressure jet of detergent solution  between 25 and 

250 bar (360 - 3600 PSI).

This appliance has been designed for use with the detergents 

supplied or recommended by the manufacturer.  The use of 

other detergents or chemicals may influence the safety of the 

appliance.

This appliance must be used only for the purpose for which it 

was specifically designed.

All other uses are to be considered incorrect and therefore 

unreasonable.

Examples of unreasonable use:

-  Washing surfaces not suitable for cleaning with a high 

pressure jet.

- 

Washing people, animals, electric equipment or the machi-

ne itself.

- 

Using unsuitable detergents or chemicals.

-  Blocking the trigger (lever) of the lance in delivery posi-

tion.

Improper, incorrect or unreasonable use absolves the Manu-

facturer of all liability. 

All high pressure washers are constructed in compliance with 

current safety standards and regulations.