IPC Portotecnica ATOMAX-C D 1813 P 40964 IDAF - Инструкция по эксплуатации - Страница 17

English

- 17 -

CLASSIFICATION

The user must observe the conditions of use of the applian-

ce prescribed by the Rules, and particularly he must respect 

the following classification:

As for the protection against electric shock, the H.P.cleaner 

belongs to 

CLASS I.

The H.P. cleaner is factory set  and all its safety devices are 

sealed. 

It is forbidden to alter their adjustment values.

The  H.P.  cleaner  must  be  always  used    on  a  firm    and  flat 

ground, furthermore it must not be moved while it is working or 

connected to the electric supply.

The water cleaner is considered as a fixed device.

Failure to observe this prescription may cause danger for the 

user.

The H.P. cleaner must not be used in the presence of corrosive 

or potentially explosive atmospheres. (vapours or gas).

!

!

CLASSIFICATION OF RISKS: 

Danger

Identifies an imminent risk which could lead to serious or fatal 

injury.

Warning

Identifies a risk situation which could lead to serious injury.

Information

Identifies  a  risk  situation  which  could  lead  to  minor  injury  or 

damage to things.

PREFACE

        Warning 

You must read this manual before installing, starting up and 

using the high pressure washer.

This manual is an integral part of the product.

Read the warnings and instructions contained in the manual 

carefully as they provide important information on 

USER SA-

FETY and MAINTENANCE

, paying particular attention to the 

general safety regulations.

KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE 

REFERENCE.

Warning 

Those operating and servicing the high pressure washer must 

be aware of the contents of this manual.

!

!

GENERAL SAFETY RULES FOR 

THE USE OF HIGH PRESSURE 

CLEANERS

Warning

- The electric connection must be performed 

by  qualified  technicians  who  are    able  to 

work in observance of the governing rules 

(in compliance with the provisions of the IEC 

60364-1 standard) and of the manufacturer’s 

instructions.

A wrong electric connection may cause 

damage to persons, animals or things, and 

the manufacturer  cannot be considered 

responsible for these.

- The H.P. cleaners with power lower than 3 

kW are equipped with a plug for  connection 

to the electric supply.

In this case please check if the electric 

power system and the electric sockets are 

compatible  with  the  max.  power  of  the  ap

-

pliance indicated on the plate. (kW)

In  case  of  doubt,  please  apply  to  qualified 

personnel.

If the socket and the plug of the machine are 

not compatible, have the plug replaced with 

a suitable type by qualified personnel.

- Before connecting the machine make sure 

that the data indicated on the plate corre-

spond to those of the electric supply.

-  Do  not  use  extensions  to  power  the  high 

pressure washer.

If you use an extension, the plug and socket 

must be watertight.  Unsuitable extensions 

may be dangerous.

- The electric safety of this machine may be 

assured only when it is properly connected to 

an efficient grounding system in accordance 

with the governing laws for electric safety. 

(In compliance with the provisions of IEC 

!