IPC Portotecnica ATOMAX-C D 1813 P 40964 IDAF - Инструкция по эксплуатации - Страница 18

English

- 18 -

60364-1).

It is necessary to check this essential safety 

requisite. In case of doubt, ask for accurate 

control  of  the  power  system  by  qualified 

personnel.

The manufacturer may not be considered 

responsible for damages occurred because 

of the lack of the grounding system.

- The H.P. cleaner must be connected to the 

electric supply by means of an omnipolar 

switch with opening contacts of at least  3 

mm. This switch must have electric features 

which are consistent with the appliance and 

in accordance with the wiring rules. (This 

requisite does not apply to H.P. cleaners with 

plug and electric power lower than 3 kW).

It is recommended that the electric supply 

to this machine should include a residual 

current device that will interrupt the supply 

if  the  leakage  current  to  earth  exceeds  30 

mA for 30 ms or a device that will prove the 

earth circuit.

- The appliance is disconnected from the 

electric supply only by pulling out the plug or 

switching off the omnipolar switch.

- Water cleaners with the “Total Stop” device 

should be considered as off when the omni

-

polar switch is in the “O” position or the plug 

is unplugged from the socket.

- Always switch off the mains disconnecting 

switch when leaving the appliance unatten-

ded.

- The high pressure washer is not intended 

for use by children, adolescents or persons 

with reduced physical, sensory or mental 

capabilities,  under  the  influence  of  alcohol 

or lacking experience and knowledge.

Operators must be made aware of the 

instructions for using the appliance by a 

person responsible for their safety. 

Children must be supervised to ensure they 

do not play with the high pressure washer.

- Use only original accessories that can allow   

safe working of the appliance.

- The flexible hose connecting the lance to 

the H.P. cleaner and trigger gun must not 

are damaged. In case of damage, replace it 

immediately. 

The hose must be marked with 

the permitted pressure, date of fabrication 

and manufacturer.

-  Hoses,  connections  and  fittings  for  high 

pressure systems are very important to 

guarantee the safety of the H.P. cleaner. 

Use only original spare parts which have the 

manufacturer’s approval.

- Do not use the H.P. cleaner when persons 

or animals are in its field of action.

- High pressure jets may be dangerous if not 

properly used.

The jet must never be directed at persons 

or animals, electric appliances or at the 

appliance itself.

- The high pressure water jet causes a re-

action power on the lance. Hold the lance 

grip vigorously.

- The use of the H.P. cleaner must be consi-

dered according to the kind of  washing which 

must be performed.

Protect yourself against the ejection  of solid 

materials or corrosive substances by means 

of adequate protective clothing. (Gloves, 

goggles, etc.)