Epson WorkForce WF-7525 - Инструкция по эксплуатации - Страница 116

11

Error Messages

Solution

Paper jam. Press   to see how to remove jammed paper.

R

&

 123

Paper out or paper jam. Check paper size and load paper 
in paper cassette.

Load some paper or clear the jammed paper. Otherwise, make sure the 
number of sheets does not  exceed the limit speciied for the type of 
media you are using. 

R

&

 22, 123

Paper jam inside, in back, or in ADF. Press   to see how to 
remove jammed paper.

R

&

 126, 127

Paper feed error or jam. Remove the paper and reload 
paper correctly. See your documentation.

R

&

 128

Communication error. Make sure the computer is 
connected, then try again.

Make sure the computer is connected correctly. If the error message 
still appears, make sure that scanning software is installed on your 
computer and that the software settings are correct.

Printer error. Turn power of and then on again. For details, 
see your documentation.

Turn the printer of and then back on. Make sure that no paper is still in 
the printer. If the error message still appears, contact Epson support.

A printer’s ink pad is nearing the end of its service life. 
Please contact Epson Support.

Press 

x

 to resume printing. The message will be displayed until the ink 

pad is replaced. Contact Epson support to replace ink pads before the 
end of their service life. When the ink pads are saturated, the printer 
stops and Epson support is required to continue printing.

A printer’s ink pad is at the end of its service life. Please 
contact Epson Support.

Contact Epson support to replace the ink pad.

Backup Error. 
Error Code xxxxxxxx

A problem occurred and backup was canceled. Make a note of the 
error code and contact Epson support.

No dial tone detected. Try Check Fax Connection.

Make sure the phone cable is connected correctly and the phone line 
works. 

R

&

 62 If you connected the product to a PBX (Private Branch 

Exchange) phone line or Terminal Adapter, turn of the 

Dial Tone 

Detection

. 

R

&

 90

The combination of IP address and subnet mask is invalid. 
See your documentation.

Refer the online Network Guide.

Recovery Mode

The irmware update has failed. You will need to re-attempt the 
irmware update. Ready a USB cable and visit your local Epson website 
for further instructions.

Error Messages
Сообщения об 
ошибках
Повідомлення про 
помилки

EN

EN

R

&

 116

If the displayed error message indicates that the size of the loaded paper does not match the paper size setting, load the correct paper 
and set the paper size again. 

R

&

 24

RU

UK

R

&

 118

R

&

 117