MSI B550M PRO-VDH - Инструкция по эксплуатации - Страница 50

38

UEFI BIOS

▶

Memory Try It ! [Disabled]

It can improve memory compatibility or performance by choosing optimized memory 

preset. This item will be available when the installed processor supports this function.

▶

Memory Failure Retry [Enabled]

Enables or disables the system reboot function when the memory OC retry fails.

▶

Memory Failure Retry Count [2]

Sets the count for memory OC retry. When memory OC retry fails reach the count, 

the memory will restore the last available settings. This item will display when the 

Memory Failure Retry

 sets to 

Enabled

.

▶ Advanced DRAM Configuration

Press 

Enter

 to enter the sub-menu. User can set the memory timing for each/ all 

memory channel. The system may become unstable or unbootable after changing 

memory timing. If it occurs, please clear the CMOS data and restore the default 

settings. (Refer to the Clear CMOS jumper section to clear the CMOS data, and enter 

the BIOS to load the default settings.)

▶

DigitALL Power sub-menu 

Press 

Enter

 to enter the sub-menu. In the sub-menu, you can setup some protecting 

conditions about voltage/ current/ temputure for CPU.

▶

CPU Voltages control [Auto] 

These options allows you to set the voltages related to CPU. If set to 

Auto

,  BIOS will 

set these voltages automatically or you can set it manually. 

▶

DRAM Voltages control [Auto] 

These options allows you to set the voltages related to memory. If set to 

Auto

,  BIOS 

will set these voltages automatically or you can set it manually. 

▶

CHIP Voltages control [Auto] (optional)

These options allows you to set the voltages related to chipset If set to 

Auto

,  BIOS will 

set these voltages automatically or you can set it manually. 

▶

Memory Changed Detect [Enabled]*

Enables or disables the system to issue a warning message during boot when the 

memory has been replaced.
[Enabled] 

The system will issue a warning message during boot and then you have 

to load the default settings for new devices.

[Disabled] 

Disables this function and keeps the current BIOS settings.

▶ CPU Specifications sub-menu

Press 

Enter

 to enter the sub-menu. This sub-menu displays the information of 

installed CPU. You can also access this information menu at any time by pressing [F4]. 

Read only.

▶

MEMORY-Z sub-menu

Press 

Enter

 to enter the sub-menu. This sub-menu displays all the settings and 

timings of installed memory. You can also access this information menu at any time by 

pressing [F5].