GIGABYTE GA MA770T ES3 rev 1 0 - Инструкция по эксплуатации - Страница 43

- 43 -

BIOS Setup

  Password Check 

Specifies  whether  a  password  is  required  every  time  the  system  boots,  or  only  when  you  enter  BIOS 
Setup. After configuring this item, set the password(s) under the 

Set Supervisor/User Password

 item in 

the BIOS Main Menu.

Setup   

A password is only required for entering the BIOS Setup program. (Default)

System    

A password is required for booting the system and for entering the BIOS Setup  

program.

  HDD S.M.A.R.T. Capability

Enables  or  disables  the  S.M.A.R.T.  (Self  Monitoring  and  Reporting Technology)  capability  of  your  hard 
drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings 
when a third party hardware monitor utility is installed. (Default: Enabled)

  Away Mode

Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the 
system to silently perform unattended tasks while in a low-power mode that appears off. 

(Default: Disabled)

  Full Screen LOGO Show

Allows  you  to  determine  whether  to  display  the  GIGABYTE  Logo  at  system  startup. 

Disabled

  displays 

normal POST message. (Default: Enabled)

  Backup BIOS Image to HDD

Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will 
be recovered from this image file. (Default: Disabled)

  Init Display First

Specifies the first initiation of the monitor display from the installed PCI graphics card or the PCI Express 
graphics card.

PCI   

Sets the PCI graphics card as the first display. (Default)

PEG   

Sets the PCI Express graphics card on the PCIEX16 slot as the first display.