GIGABYTE GA M68M S2 rev 1 - Инструкция по эксплуатации - Страница 35

- 35 -

BIOS Setup

2-3

MB Intelligent Tweaker(M.I.T.)

Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

MB Intelligent Tweaker(M.I.T.)

Set Memory Clock

[Auto]

x Memory Clock

x2.66

533MHz



DRAM Configuration

[Press Enter]



: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level



Set Memory Clock

Determines whether to manually set the memory clock.  Auto  lets BIOS automatically set the
memory clock as required. Manual allows the memory clock control item below to be configurable.
(Default: Auto)

Memory Clock

This option is configurable only when Set Memory Clock is set to Manual.
When you use a AM3/AM2+ CPU:

X2.00

Sets Memory Clock to X2.00.

X2.66

Sets Memory Clock to X2.66.

X3.33

Sets Memory Clock to X3.33.

X4.00

Sets Memory Clock to X4.00.

X5.33

Sets Memory Clock to X5.33.

When you use a AM2 CPU:

DDR 400

Sets Memory Clock to DDR 400.

DDR 533

Sets Memory Clock to DDR 533.

DDR 667

Sets Memory Clock to DDR 667.

DDR 800

Sets Memory Clock to DDR 800.