GIGABYTE GA H67A USB3 B3 rev 1 0 - Инструкция по эксплуатации - Страница 49

- 49 -

BIOS Setup

(Note)  Supported on Windows 7/Vista operating system only. 

  Resume by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled)

If enabled, set the date and time as following: 

Date  (of  Month) Alarm: Turn  on  the  system  at  a  specific  time  on  each  day  or  on  a  specific  day  in  a 

month. 

Time (hh: mm: ss) Alarm: Set the time at which the system will be powered on automatically. 

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the 
AC power, or the settings may not be effective.

  HPET Support

 (Note)

Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system.

(Default: Enabled)

  HPET Mode

 (Note)

Allows  you  to  select  the  HPET  mode  for  your  Windows  7/Vista  operating  system.  Select 

32-bit  mode

when  you  install  32-bit  Windows  7/Vista;  select 

64-bit  mode

  when  you  install  64-bit  Windows  7/Vista. 

This item is configurable only when the 

HPET Support

 is set to 

Enabled

. (Default: 32-bit mode)

  Power On By Mouse

Allows the system to be turned on by a PS/2 mouse wake-up event. 

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead. 

Disabled   

Disables this function. (Default)

Double Click  Double click on left button on the PS/2 mouse to turn on the system.

  Power On By Keyboard

Allows the system to be turned on by a PS/2 keyboard wake-up event. 

Note: you need an ATX power supply providing at least 1A on the +5VSB lead. 

Disabled   

Disables this function. (Default)

Password   

Set a password with 1~5 characters to turn on the system. 

Keyboard 98  Press POWER button on the Windows 98 keyboard to turn on the system.

  KB Power ON Password

Set the password when 

Power On by Keyboard

 is set to 

Password

. Press <Enter> on this item and set 

a password with up to 5 characters and then press <Enter> to accept. To turn on the system, enter the 
password and press <Enter>.

Note:  To  cancel  the  password,  press  <Enter>  on  this  item.  When  prompted  for  the  password,  press  
<Enter> again without entering the password to clear the password settings. 

  AC Back Function

Determines the state of the system after the return of power from an AC power loss.

Soft-Off   

The system stays off upon the return of the AC power. (Default) 

Full-On   

The system is turned on upon the return of the AC power.

Memory   

The system returns to its last known awake state upon the return of the AC power.

  ErP Support 

Determines  whether  to  let  the  system  consume  less  than  1W  power  in  S5  (shutdown)  state.  (Default: 
Disabled)

Note: When this item is set to Enabled, the following four functions will become unavailable:

PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.