JVC KD-G731 - Инструкция по эксплуатации - Страница 14

ENGLISH

14

Using the Bluetooth ® devices

For Bluetooth operations, it is required to connect the 

Bluetooth Adapter

 (KS-BTA200) to the CD changer jack on 

the rear of this unit. See also page 23.
•  Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
•  Refer to the list (included in the box) to see the countries where you may use the Bluetooth® function.

To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish 
Bluetooth wireless connection between the unit and the device.
•  Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be 

registered in total.

•  Only one device can be connected at a time for each source (“BT-PHONE” and “BT-AUDIO”).

Registering a Bluetooth device 

2

  Select “NEW.”

3

  Select “OPEN.”

4

  Enter a PIN (Personal Identification 

Number) code to the unit.

•  You can enter any number you like (1-digit to 

16-digit number). [Initial: 0000]

* 

Some devices have their own PIN code. Enter the 
specified PIN code to the unit.

1

Move to the next (or previous) number 
position.

2

Select a number or blank space.

3

Repeat steps 

1

 and 

2

 until you finish 

entering a PIN code.

4

Confirm the entry.

“OPEN...” flashes on the display.

Registration (Pairing) methods

Use either of the following items in the Bluetooth menu 
to register and establish the connection with a device.
•  Select “BT-PHONE” or “BT-AUDIO” as the source to 

operate the Bluetooth menu. 

OPEN

Make the unit ready to establish a new 
Bluetooth connection.
Connection is established by operating the 
Bluetooth device.

SEARCH

Make the unit ready to establish a new 
Bluetooth connection. 
Connection is established by operating 
the unit.

Registering using “OPEN”

Preparation

Operate the device to turn on its Bluetooth function.

1

  Select “BT-PHONE” or “BT-AUDIO.”