Hyundai Electronics H-CMD2062G - Инструкция по эксплуатации - Страница 16

16

Operation

program is played the mode will skip to the 
RDS mode automatically. It will resume to the 
primary mode after the TA is over.

Program type (PTY)

Press PTY/MDC button on the RC to 

activate the PTY function, press it repeatedly 
to show Music group/Speech group. Choose 
the needed PTY type by pressing the icon 
in the touchable screen or pressing the 
corresponding number buttons on the RC. 
When PTY search is on, and the selected 
type matches, PTY information is displayed. 
If PTY code is different or not available, PTY 
engaging automatically exit to normal mode.

Stereo/mono reception

Press STEREO/MONO button on the RC 

to select stereo reception or mono reception 
mode. When the received stereo signal is weak, 
switch to mono mode to improve the signal. 
The function is available only in FM bands.

Radio background mode

While listening to the radio, press and hold 

MODE button on the front panel. Navigation 
mode will be enabled (if the GPS SW card is 
connected), while the radio will be played in 
background mode.

TV tuner operation

Connect a TV antenna to the TV antenna 

jack of the unit. Select TV mode, then touch 
the center of the display; following interface will 
be displayed:

SEEK+/

 on the RC, the automatic search 

will start. It will play when finds the station.

Programming tuner stations

There are 6 numbered preset buttons on the 

RC, with which you can store and recall stations 
for each band (18 FM, 12 AM (MW)). Select a 
station, then press and hold a preset button. 
The station will be saved in the memory under 
the corresponding number. To recall a stored 
station, press the corresponding preset button.

Auto memory store/Preset scan

Auto store: Select a band, press and hold 

P.SCN/RPT button on the RC to enter auto 
store mode. The radio will automatically store 6 
stations to the 6 preset memories of the current 
band. To stop auto store, press the button again.

Preset scan: Select a band, press P.SCN/

RPT button on the RC to scan all preset 
stations in the memories of the current band. 
To stop preset scan, press the button again.

RDS background

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

AF (Alternative frequencies) function

Press AF/TA button on the RC to enable 

AF function. When the radio signal strength is 
poor, enabling the AF function will allow the 
unit to automatically search another station 
with the same PI (Program Identification) as the 
current station but with stronger signal strength.

TA (Traffic alarm) function

Touch TA button on the screen or press and 

hold AF/TA button on the RC to switch on the 
TA function. When TA is on, the TA displays 
on TFT, or else, if there is no TP information, 
the mode will search TP station automatically. 
When TA is playing, the volume will be adjusted 
to a TA level automatically. When other modes 
are activated (such as DVD, AUX), if a TA