Hyundai Electronics H-CMD2062G - Инструкция по эксплуатации - Страница 13

12

13

Operation

Operation

the arrow icon in the right/left part of the screen 
to switch between the 2 menu pages; or touch 
the screen on any non-functional area, then 
slide the page aside (rightwards/leftwards) to 
select between the 2 menu pages.

  The Disc, USB and SDHC modes are 

only available when a disc, USB or a memory 
card is inserted into the unit.

Navigation (option)

•  Before switching the unit on, connect the 

supplied GPS antenna to the GPS antenna input 
on the rear panel.

•  Insert Navigation memory card into the 

Memory card slot of the unit. The unit will 
automatically switch to the SDHC mode. You 
should select the map path (for more details, 
see “System setup. General page“ item below). 
This is required only for the first use of the 
Navigation SD card. To enable navigation mode, 
touch NAVIGATION button in the main menu or 
press and hold MODE button on the panel.

•  For more details about operations with 

navigation program, please read the instruction 
manual to the navigation software. You can 
download the quickstart guidance and full 
instruction manual for the navigation program 
from the web site of the navigation software 
manufacturer.

AV in jack

AV jack is intended to receive audio and video 

signals by connecting to external device.

Subwoofer

Connect a subwoofer to this unit using the 

Subwoofer output of this unit. For subwoofer 
operation an external amplifier is required.

System setup

When you select SETTING mode, the menu 

will be displayed, in which you can touch any 
item to select corresponding setting page:

1

2

3

4

1. Touch to return to the main menu.
2. Parameter list. Touch a parameter to select 

it for adjustment.

3. Touch an icon to select corresponding 

setting page.

4. Option/setting list. Touch to adjust the 

corresponding parameter.

General page

•  Calibration: “Carefully press and hold 

stylus on the center of the target. Repeat 
as the target moves around the screen” is 
displayed. Touch and hold the cross in each 
position until it moves to a different position. 
After repeating it 4 times, the calibration of the 
screen is complete; touch the screen anywhere 
to return to menu. The calibration procedure is 
useful when some malfunction occurs with the 
touch screen, and it needs adjustment.

•  Map Path: Select the path to the 

navigation maps, when the navigation card is 
inserted into the unit.

Sound page

•  Beep: Select ON (beep is heard at any 

button pressing) or OFF (no beep).

•  Loud: Selecting loudness ON will 

emphasize the low frequency output.

•  Subwoofer: set the subwoofer on or off.

Display page

•  Backlight: adjust the display brightness.
•  Backlight off: set the time after which the 

screen will turn off automatically (if DIMMER is