Bosch MC812W501 - Инструкция по эксплуатации - Страница 28

28 

en

Cleaning and maintenance 

Taking the stirring whisk apart for 
cleaning

The stirring whisk can be taken apart for 
cleaning.

X

Fig. 

M

1. 

Remove the stirring whisk from the gear.

2. 

Push in the lug and lift off the gear 
cover.

3. 

Remove both gear wheels from the 
housing. Clean carefully with a brush.

4. 

After cleaning and drying, re-assemble 
all parts in reverse order.

Cleaning the juice centrifuge

To clean the juice centrifuge, remove the 
filter basket from the grating container. 
Prerinse the parts under running water.

Caution!

Clean the slats of the filter basket carefully 
so as not to damage them.

Cleaning the dicer

Taking the dicer apart for cleaning

X

Fig. 

N

1. 

Fit the blade guard. Take the dicer out of 
the bowl.

2. 

Open the catches. Remove the cutter 
disc with the blade guard.

W

Risk of injury!

Grasp the cutter disc and cutting grid by the 
plastic part only.

3. 

Remove any remaining pieces of food 
using the cutting grid cleaner.

4. 

Force out the cutting grid with the 
cleaner from below.

Clean the base holder in the dishwasher.
Prerinse all other parts under running water. 
Clean parts with a brush.

Cleaning the blender

The blender jug (without the blade insert), 
lid and funnel are dishwasher-proof. Do not 
clean the blade insert in the dishwasher but 
under running water (do not soak in water).

Taking the blade insert apart for cleaning

X

Fig. 

O

1. 

Turn the empty blender jug over. Rotate 
the blade insert anti-clockwise by the 
wings. The blade insert will release.

2. 

Take the blade insert out and remove 
the sealing ring.

3. 

After cleaning and drying, fit the sealing 
ring to the blade insert.

4. 

Fit the blade insert into the blender 
jug from below and rotate clockwise to 
secure.  
Rotate the blade insert at least until the 
wing matches up with the marking on 
the blender jug.

Caution!

Never use the blade insert without the seal.

Cleaning the universal cutter

It is recommended cleaning the universal 
cutter immediately after use. This will 
prevent residues from drying on and 
possibly attacking the plastic (e.g. essential 
oils in herbs).
Do not clean the jug with the drive in the 
dishwasher but under running water using 
a brush. Do not leave in water. To dry, place 
the jug with the drive facing up.