Bosch MC812W501 - Инструкция по эксплуатации - Страница 27

 27

en

Cleaning and maintenance

Note:

 The longer the appliance remains 

switched on, the finer the ingredients will 
be cut. With herbs the desired cutting 
result may be achieved very quickly after 
switching the appliance on. A brief “tap” on 
setting 

M

 may be sufficient.

■ After processing, release the rotary 

switch. Disconnect the mains plug.

After using the appliance 

■ Rotate the universal cutter anti-

clockwise and remove.

■ Turn the universal cutter over, and the 

chopped food will fall into the lid.

■ Hold the lid. Rotate the jug anti-

clockwise and remove.

■ Remove the rest of the chopped food 

from the jug using a suitable implement 
(e.g. spoon).

■ Clean all parts immediately after use. 

X

 “Cleaning and maintenance” see 

page 27

Cleaning and maintenance

The appliance requires no maintenance. 
Thorough cleaning will guarantee a long 
service life. 

General information

■ Clean all parts immediately after use. 

This will prevent residues from drying 
on and possibly attacking the plastic 
(e.g. essential oils in herbs).

■ When processing food such as carrots 

and red cabbage, plastic parts may 
become discoloured. This can however 
be removed with a few drops of cooking 
oil.

Caution!

–

Do not use cleaning agents containing 
alcohol or spirits.

–

Do not use any sharp, pointed or metal 
objects.

–

Do not use abrasive cloths or cleaning 
agents.

–

Do not wedge plastic parts in the 
dishwasher as they could become 
permanently deformed.

–

Carefully clean the filter basket slats of 
the juice centrifuge so as not to damage 
them.

W

Risk of injury!

–

Take care when handling sharp cutting 
blades.

–

Grasp the universal blade by the 
edge of the plastic handle only.

–

Grasp the cutting discs by the edge only.

–

Never grasp the sharp blades or edges 
of the dicer insert. Grasp the slicing disc 
by the plastic stud in the centre only.

–

Do not touch the blender blades and 
universal cutter blades with bare hands.

–

Use a brush to clean the blades and 
cutting discs.

W

Risk of electric shock!

Unplug the appliance before cleaning it.

Cleaning the base unit

■ Never immerse the base unit in liquids 

or hold under running water and do not 
clean in the dishwasher. Do not steam-
clean the appliance.

■ Wipe the base unit with a damp cloth. 

If required, use a little detergent.

■ Then dry the base unit.

Cleaning the bowl, tools and 
accessories

■ It is recommended rinsing all parts 

under running water immediately after 
use.

■ Take accessories apart before cleaning. 

Do this in reverse order as described in 
the individual chapters.

■ After cleaning, allow all parts to dry 

thoroughly or rub dry.