Bosch PFS 5000 E (0603207202) - Инструкция по эксплуатации - Страница 20

20

 | English

u

Take note of possible risks posed by the spray mater-
ial. Observe the markings on the container or the man-
ufacturer's information regarding the spray material,
including the instructions about using personal pro-
tective equipment.

 You must comply with the manufac-

turer's instructions in order to reduce the risk of fire and
of injury caused by poison, carcinogens, etc.

u

Keep the mains plug and the spray system trigger
switch free from paint and other liquids. Never hold

the cable by its plug connection for support.

 Doing this

could cause electric shock.

u

Supervise children.

 This will ensure that children do not

play with the fine spray system.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.

Symbols

The sticker regarding operation of the fine-spray system is located on the
base station. The correct interpretation of the symbols helps you operate the
fine-spray system better and more safely.

Symbols and their meanings

Detailed description

The fine-spray system is
suitable for glazes and
lacquers and for wall
paints.

"Wood/glaze" applica-
tion:

Spraying glazes and
primers

"Wood/lacquer" ap-
plication:

Spraying solvent-based
and water-dilutable lac-
quers, clear lacquers
and oils

"Wall" application:

Spraying emulsion and
latex paints

(see "Intended Use",
page 21)

Step 1:
Choose the correct
nozzle cap

Choose the grey nozzle
cap 

(11)

 for the "wood/

glaze" application

Choose the black nozzle
cap 

(12)

 for the "wood/

lacquer" application

Choose the white nozzle
cap 

(10)

 for the "wall"

application

(see "Changing the
nozzle cap (see
figures 

B1

–

B2

)",

page 22)

Select setting 1, 2 or 3
on the thumbwheel 

(4)

for the "wood/glaze" ap-
plication

Select setting 1, 2 or 3
on the thumbwheel 

(4)

for the "wood/lacquer"
application

Select setting 4 or 5 on
the thumbwheel 

(4)

 for

the "wall" application

(see "Setting the spray
material quantity (see
figure 

J

)", page 24)

1 609 92A 686 | (17.06.2021)

Bosch Power Tools