Bosch PFS 5000 E (0603207202) - Инструкция по эксплуатации - Страница 19

English | 

19

Personal safety

u

Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. 

A moment of inatten-

tion while operating power tools may result in serious per-
sonal injury.

u

Use personal protective equipment. Always wear eye
protection. 

 Protective equipment such as a dust mask,

non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal in-
juries.

u

Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. 

Carrying power tools with your finger on the switch or en-
ergising power tools that have the switch on invites acci-
dents.

u

Remove any adjusting key or wrench before turning
the power tool on. 

 A wrench or a key left attached to a

rotating part of the power tool may result in personal in-
jury.

u

Do not overreach. Keep proper footing and balance at
all times. 

 This enables better control of the power tool in

unexpected situations.

u

Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair and clothing away from moving
parts. 

Loose clothes, jewellery or long hair can be caught

in moving parts.

u

If devices are provided for the connection of dust ex-
traction and collection facilities, ensure these are con-
nected and properly used. 

 Use of dust collection can re-

duce dust-related hazards.

u

Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles.

 A careless action can cause severe in-

jury within a fraction of a second.

Power tool use and care

u

Do not force the power tool. Use the correct power
tool for your application. 

 The correct power tool will do

the job better and safer at the rate for which it was de-
signed.

u

Do not use the power tool if the switch does not turn it
on and off. 

 Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

u

Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. 

Such preventive

safety measures reduce the risk of starting the power tool
accidentally.

u

Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. 

 Power

tools are dangerous in the hands of untrained users.

u

Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use.

 Many accidents are caused by

poorly maintained power tools.

u

Keep cutting tools sharp and clean. 

 Properly main-

tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.

u

Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. 

 Use of the power tool for operations different

from those intended could result in a hazardous situation.

u

Keep handles and grasping surfaces dry, clean and
free from oil and grease. 

 Slippery handles and grasping

surfaces do not allow for safe handling and control of the
tool in unexpected situations.

Service

u

Have your power tool serviced by a qualified repair
person using only identical replacement parts. 

This

will ensure that the safety of the power tool is maintained.

Safety instructions for fine spray systems

u

Keep your work area clean, well lit and free of paint or
solvent containers, cloths and other flammable mater-
ials. 

There is a risk of spontaneous combustion. Ensure

that you have access to functioning fire extinguishers or
extinguishing equipment at all times.

u

Ensure that the spray area is well ventilated and that
there is sufficient fresh air circulating in the whole
area.

 Evaporating flammable solvents create an explosive

environment.

u

Do not spray or clean with materials with a flash point
lower than 55 °C. Use water-based materials, non-
volatile hydrocarbons or similar materials. 

Volatile

evaporating solvents create an explosive environment.

u

Do not spray near ignition sources such as static elec-
tricity sparks, naked flames, pilot lights, hot objects,
engines, cigarettes and sparks created by plugging in
and unplugging electric cables or operating switches.

These kinds of spark sources can lead to combustion of
the surrounding environment.

u

Do not spray materials if it is not clear whether they
might be dangerous.

 Unknown materials could create

hazardous conditions.

u

Do not spray boiling water. Spray only warm water
(max. 55 °C) which is free from chemical additives.

u

Wear additional personal protection equipment such
as appropriate protective gloves and a protective
mask or respirator when spraying or handling chemic-
als. 

Wearing personal protection equipment appropriate

to the conditions reduces your exposure to hazardous
substances.

Bosch Power Tools

1 609 92A 686 | (17.06.2021)