BRAYER BR1106 - Инструкция по эксплуатации - Страница 7

7

EN

and pour the water out of the cup.

•  Depending on the cup capacity repeat this procedure 

several times until the boiler is clean.

THERMOMETER

You can control the temperature by the indicators 

(10, 12) and with the built-in thermometer (7). The 

thermometer (7) scale shows the water temperature in 

the coffee maker.

PREHEATING

• 

To make a cup of hot espresso, it is recommended to 

preliminary heat up the coffee filter (6) and the filter 

holder (5).

• 

Remove the tank (15), оpen the lid (13) and fill the 

tank (15) with water, or remove the tank (15) and fill it 

with water, then install the tank (15) back to its place.

• 

Install the coffee filter (6) into the holder (5) having 

preliminary matched the ledge on the filter (6) with 

the groove on the holder (5) and turn the filter (6) 

counter/clockwise to fix the filter.

• 

Install the filter holder (5) into the coffee maker. The 

holder (5) ledges should match the grooves on the 

boiler « 

 », after that turn the filter holder handle 

(3) to the right until bumping «   ».

•  Place a suitable cup on the grid (2).

•  Insert the power plug into the mains socket.

• 

Switch the coffee maker on, setting the power switch 

(19) to the «I» position, the indicator (11) will light up, 

and the ready indicator (10) will start flashing.

•  Wait until the indicator (10) «

» lights up, then 

switch the water supply on by pressing the button 

ATTENTION!

• 

Do not remove the filter holder (5) when the 

buttons (9,10) are pressed.

• 

Do not remove the filter holder (5) immediately 

after preparing coffee as there is redundant water 

and steam pressure inside the filter (5), let the 

coffee maker cool down completely.

• 

To remove the filter holder (5) turn the handle (3) 

to the left «   » and remove the filter holder (5).

AUTO SWITCH OFF FUNCTION

• 

If no actions were performed during 29 minutes 

after switching on, the coffee maker will switch off 

automatically.

HOW TO MAKE A GOOD ESPRESSO

• 

Use ground coffee for espresso coffee makers.

• 

Slightly tamp the ground coffee in the filter (6), you 

can do it with the back side of the measuring spoon 

(20).

• 

Coffee strength depends on the quality and grinding 

degree of coffee beans. If coffee is pouring out too 

long, this means the coffee powder is too fine or it is 

tamped too strongly.