BRAYER BR1106 - Инструкция по эксплуатации - Страница 6

Кофеварка BRAYER BR1106 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 56
Загружаем инструкцию
background image

6

EN

• 

Transport the coffee maker in the original package.

• 

Keep the unit out of reach of children and disabled

•  persons.

COFFEE MAKER IS INTENDED FOR HOUSEHOLD 

USE ONLY, DO NOT USE THE COFFEE MAKER FOR 

COMMERCIAL OR LABORATORY PURPOSES.

BEFORE USING THE COFFEE MAKER

After unit transportation or storage at low 

temperature, it is necessary to keep it for at least 

three hours at room temperature.

• 

Unpack the coffee maker and remove all the 

packaging materials. 

•  Keep the original package.

• 

Read the safety measures and operating 

recommendations.

•  Check the delivery set.

• 

Examine the coffee maker for damages, in case of 

damage do not plug it into the mains.

• 

Make sure that the specifications of power supply 

voltage specified on the label correspond to the 

specifications of your mains. When the unit is used in 

the mains with 60 Hz frequency, it does not need any 

additional settings.

• 

Wipe the surface of the coffee maker body with a 

clean, slightly damp cloth to remove dust. 

•  Make sure that the control buttons (8, 9) are in the 

off position.

•  Make sure that the steam supply is closed. To do this 

turn the knob (16) « / » to the position « ».

• 

Before using the coffee maker for the first time, wash 

all removable parts (1, 2, 5, 6, 15, 20) with warm 

water and neutral detergent, rinse and dry them.

• 

Remove the water tank (15), fill it with cold water up 

to the MAX mark and install it back to its place.

• 

Install the coffee filter (6) (do not add ground coffee 

into the filter) into the holder (5) having preliminary 

matched the ledge on the filter (6) with the groove on 

the holder (5) and turn the filter (6) counter/clockwise 

to fix the filter.

• 

Install the filter holder (5) into the coffee maker. The 

holder (5) ledges should match the grooves on the 

boiler « 

 », after that turn the filter holder handle 

(3) to the right until bumping «   ».

•  Place a suitable cup on the grid (2).

•  Insert the power plug into the mains socket.

• 

Switch the coffee maker on, setting the power switch 

(19) to the «I» position, the indicator (11) will light up, 

and the ready indicator (10) will start flashing.

• 

To fill the boiler with water press the button (9) «

», wait for 15-20 seconds, or at the first signs 

of appearance of water in the cup, switch the water 

supply off by pressing the button (9) «

» again. 

•  Wait until the indicator (10) glows constantly, then 

switch the water supply on by pressing the button 

(9) «

». After the cup is filled with water, press the 

button (9) «

» again to switch the water supply off 

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к BRAYER BR1106?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"