BRAYER BR1106 - Инструкция по эксплуатации - Страница 12

12 EN

machines, strictly following the instructions on their 

usage.

CLEANING THE COFFEE MAKER

• 

If there is ground coffee scale remainin in the filter (6) 

openings, clean the filter (6) with a small brush.

• 

Wipe the coffee maker body with a soft, slightly damp 

cloth and then wipe the coffee maker body dry. Do 

not use abrasives and solvents to clean the coffee 

maker body.

• 

Do not immerse the coffee maker body (18), the 

power cord and the power plug into water or any 

other liquids.

• 

Wash the removable parts of the coffee maker with 

warm water and neutral detergent, then rinse them 

and dry.

DRIP TRAY (1)

• 

When the tray (1) is full Remove the grid (2) from 

the tray (1), remove the tray (1) and pour out water, 

install the tray back to its place, put the grid (2) on 

the tray (1).

• 

If necessary, wash the tray (1) and the grid (2) with 

water and soft detergent, rinse and dry.

TROUBLESHOOTING

Problem

Cause

Solution

Water leaks from 

the bottom of the 

coffee maker

The tray is full of 

water.

Please, clean the tray.

The coffee 

maker is 

damaged.

Please, apply to the service 

center for repairing the 

coffee maker.

Water leaks from 

the filter holder.

There is ground 

coffee on the 

filter.

Clean the filter edges from 

ground coffee.

Ready coffee 

has unpleasant 

taste.

The coffee 

maker was not 

washed after 

descaling.

Clean the coffee maker 

from mineral scale and 

wash it from the remaining 

descaling agent.

Ground coffee 

was stored in a 

humid place for 

a long time. 

Please, use fresh ground 

coffee. Keep unused 

ground coffee in a hermetic 

package in a dry cool place. 

The unit cannot 

be switched on

No voltage in the 

mains socket.
The power plug 

is not completely 

inserted into the 

socket.

Make sure that the mains 

socket is properly operating.
Check whether the power 

plug is completely inserted 

into the socket.

Steam doesn’t 

froth milk 

The steam ready 

indicator is 

flashing.. 

You can use steam to froth 

milk only after the indicator 

starts glowing white.

The used cup 

does not suit 

for proper milk 

frothing.

Use a tall and narrow cup.

You used 

skimmed milk.

Use only whole milk with fat 

content 4-6%.