Fulgor Milano FCM 4500 TF X - Инструкция по эксплуатации - Страница 47

EN

17

14 - Making cappuccino

N.B.: 

Set the quantity of coffee you want to use to make the 

cappuccino in the “Program cappuccino” function in the 

menu.

• Select the taste of the coffee you want to use to make the 

cappuccino by pressing the   icon (B4).

• Remove the lid of the milk container.
• Fill the container with about 100 grams of milk for each 

cappuccino to be prepared (fig. 23). Never exceed the 

MAX level (corresponding to about 750 ml) marked on 

the container. You should ideally use skimmed or semi-

skimmed milk at refrigerator temperature (about 5°C).

• Make sure the intake tube is correctly inserted in the 

rubber washer (fig. 24) then replace the milk container 

lid. 

• Position the frothed milk regulator (C1) between the words 

CAPPUCCINO and CAFFELATTE printed on the milk 

container lid. The quantity of froth can be adjusted by 

moving the regulator towards the word CAFFELATTE for a 

denser froth. Moving it towards the word CAPPUCCINO 

obtains a less dense froth.

NO froth

“Denser” froth

frothed milk regulator

“Less dense” froth

• Remove the hot water spout (fig 6) and attach the milk 

container to the nozzle (fig. 25).

• Position the milk spout as shown in fig. 26 and then place 

a sufficiently large cup under the coffee and milk spouts.

• Press the 

 icon (fig. B12). “CAPPUCCINO...” is 

displayed and after a few seconds, frothed milk flows 

out of the milk spout into the cup below. (La fuoriuscita 

del latte si interrompe automaticamente). (Delivery stops 

automatically).

• The appliance delivers coffee.
• The cappuccino is now ready. Sweeten to taste and, if 

desired, sprinkle the froth with a little cocoa powder.

NOTE 1: While making cappuccino, the flow of frothed 

milk or coffee can be interrupted by pressing the 

 icon (B12).

NOTE  2:  If the milk in the container finishes while delivering 

frothed milk, remove the container and add milk.  

Reattach and press the  

 (B12) to request a 

cappuccino again. 

NOTE 3:  To ensure the complete cleanliness and hygiene 

of the milk frother, always clean the circuits in the 

milk container lid after making cappuccino. 

“PRESS CLEAN!” flashes on the display.
• Place a recipient under the milk spout (fig. 26).
• Press the CLEAN button on the lid (C3) and hold down for 

at least 5 seconds (fig. 26) to start the cleaning function. 

The appliance displays the message “CLEANING!” above 

a progressive bar. You should not release the CLEAN 

button until the bar is complete indicating that cleaning 

is concluded. When the CLEAN button is released, the 

function stops. After cleaning, remove the milk container 

and place in the refrigerator. The milk should not be left 

out of the refrigerator for more than 15 minutes.

NOTE 4:  To change the quantity of coffee or frothed milk 

the appliance delivers automatically into the cup, 

proceed as described in the section “Changing 

the quantity of coffee and milk for cappuccino”.