Liebherr CN 3503 NoFrost - Инструкция по эксплуатации - Страница 12

u

Read  the  appliance

designation

 Fig. 15 (1),

service  No.

  Fig.  15  (2)

and 

serial 

No.

Fig.  15  (3)  off  the  type

plate located inside the

appliance  on  the  left-

hand side.

Fig. 15 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

 Fig. 15 (1), service No. Fig. 15 (2) and serial No.

Fig. 15 (3).

w

This will help us to provide you with a faster and more accurate

service.

u

Keep the appliance closed until the customer service arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your appliance is designed and manufactured for a long life span

and reliable operation. If a malfunction nonetheless occurs dur-

ing operation, check whether it is due to a handling error. In this

case  you  will  have  to  be  charged  for  the  costs  incurred,  even

during the warranty period. You may be able to rectify the follow-

ing faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

u

Check fuse.

A bubbling and gurgling noise

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

A quiet clicking noise

→

The noise is produced whenever the refrigeration unit (motor)

automatically switches on or off.

u

The sound is normal.

A hum. It is briefly a little louder when the refrigeration unit

(the motor) switches on.

→

The  refrigeration  increases  automatically  when  the  Super-

Frost, function is activated, fresh food has just been placed

in the appliance or the door has been left open for a while.

u

The sound is normal.

→

The ambient temperature is too high.

u

See section on range of appliance use

A low hum

→

The sound is produced by air flow noise of the fan.

u

The sound is normal.

Vibratory noise

→

The appliance is not standing firmly on the floor. As a result,

adjoining units or objects are set into vibration by the running

refrigeration unit.

u

Move the appliance away a little and align it using the adjust-

able feet.

u

Move bottles and containers apart.

Hum of the water tank pump.*

→

When water is pumped out of the water reservoir, a brief hum

of the pump can be heard.

u

The sound is normal.

The SuperFrost button flashes together with the tempera-

ture display.

→

There is a fault.

u

Contact  the  customer  service.  See  the  section  on  mainte-

nance.

The IceMaker cannot be switched on. *

→

The appliance and therefore the IceMaker are not connected.

u

Connect the appliance. See also the section on connection.

The IceMaker does not make any ice cubes.*

→

The IceMaker is not switched on.

u

Switch on the IceMaker.

→

The drawer of the IceMaker is not properly closed.

u

Close the drawer properly.

→

The water tank is not correctly inserted.

u

Insert the water tank.

→

There is not enough water in the water tank.

u

Fill the water tank.

The LED of the IceMaker flashes. *

→

There is not enough water in the water tank.

u

Fill the water tank.

→

If the LED flashes and the water tank is full, the IceMaker is

defective.

u

Contact  the  customer  service.  See  the  section  on  mainte-

nance.

The temperature is not cold enough.

→

The door of the appliance is not properly closed.

u

Close the door of the appliance.

→

Insufficient ventilation.

u

Clear ventilation grilles.

→

The ambient temperature is too high.

u

See section on operating conditions of the appliance.

→

The appliance was opened too frequently or for too long.

u

Wait until the appliance reaches the required temperature it-

self. If not, contact the customer service. See the section on

maintenance.

→

Too much fresh food was placed inside without SuperFrost.

u

See section on SuperFrost.

→

The appliance is too close to a heat source.

u

See the section on installation.

The interior light is not on.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The door was open longer than 15 min.

u

The  interior  light  automatically  switches  off  if  the  door  has

been open for about 15 min.

→

If the interior light is not on but the temperature display is lit,

the bulb is faulty.

u

Change the bulb according to the section on maintenance.

8 Decommissioning

8.1 Switching off the appliance

Note

u

To switch on the entire appliance it is necessary only to switch

off the freezer compartment. In so doing, the refrigerator com-

partment is automatically switched off as well.

8.1.1 Switching off the freezer compartment

u

Press On/Off button, freezer compartment

 Fig. 3 (9).

w

The  temperature  displays  are  dark.  The  entire  appliance  is

switched off.

Malfunction

12