Fulgor Milano FCLBC 4500 TF BK - Инструкция по эксплуатации - Страница 55

23

GB

4.2  External surface cleaning

Body: 

the external stainless surfaces 

should be cleaned with a soft cloth or 
sponge and neutral detergent in the 

direction  of  the  satin  inishing.  Avoid  steel 

wool, scrapers or abrasive, aggressive or 
acidic substances which could permanently 
damage the stainless steel surfaces.

After cleaning, protect the external surfaces 

with speciic oil-based products for stainless 

steel.

Warning!  

The data label contains important 

and useful information for the technical 
assistance service: do not remove it while 
cleaning.

Display: 

for easy cleaning of the glass 

display  use  speciic  products  for  glass 

surfaces and a soft cloth.

4.3  Inner liner cleaning

Internal cleaning of the liner is necessary 
to ensure the hygiene and quality of 
processed products, so after each use 
it is recommended that you clean the 
appliance. The round shape of the 
internal parts and the arrangement of the 
liner accessories are designed for easy 
cleaning, to be carried out with a soft 
cloth or non-scratch sponge and neutral 
detergent.
Avoid steel wool, scrapers or abrasive, 
aggressive or acidic substances which 
could permanently damage the stainless 
steel surfaces. After cleaning, rinse with 
warm water and dry thoroughly.

4.4  Inactivity periods

If the appliance is not being used for an 
extended period it is advisable to unplug 
it from the power supply and thoroughly 
clean both inside and outside following the 
instructions in paragraphs 4.2 and 4.3. It 
is also advisable to leave the door slightly 
open for the entire period of inactivity.

On  irst  reuse,  perform  the  preliminary 

cleaning operations described in paragraph 
3.2.

5. NON-SCHEDULED 
 MAINTENANCE

5.1 Malfunctions

Maintenance and/or replacement of any 
part of the appliance must be carried out 

by  qualiied  and  authorized  technicians. 

Maintenance and/or replacement must 

be  performed  by  qualiied  and  authorized 

technicians for the lighting system as well.

Note:

 in case of any malfunction, before 

calling the support service, make sure the 
power cable is correctly plugged in and that 
there is power. If the malfunction persists, 
call the support service communicating:

• the data on the data label applied on the 

side of the appliance (par. 2.1, ig. 4);

• the date of purchase;
• any visible alarm code on the display.

Note:

 any attempt to change or repair the 

appliance will void the warranty. Rely on 

qualiied and authorised technicians only.