Hansa BK 347.4 NFC - Инструкция по эксплуатации - Страница 40

- 40 -

CONTROLS

Appliance controls

The control panel is shown in figure 10. For reference it is also shown 

below:

Adjust temperature inside the appliance

1.  When connected to the power supply the appliance starts at setting 

4.

2.  When you open the refrigerator door, the control panel backlight 

turns on and the lighting in the refrigerator compartment is on. 

The fan in the refrigerator switches off. After 1 minute of opening 

the door you will hear a beeping alarm. After about 7 minutes of 

opening the door the lighting turns off. Touch the switch to turn on 

the lighting again. When the refrigerator door is opened the control 

panel is illuminated. When you close the door, the light is turned off 

immediately, and the control panel backlight turns off after 1 min-

ute.

3. 

Press   to adjust the temperature inside the chamber. Select the 

setting from 1 to 6. 1 — the highest temperature; 6 — the lowest 

temperature.

4. 

Press and hold   for 3 seconds to turn off the appliance. The button 

lights up and the power is disconnected. Lighting inside the refrig-

erator chamber and the compressor turn off. Press and hold the 

button for 3 seconds to turn on the appliance again. Indicator lights 

up when the power is on.

5.  Frost-free models feature the forced defrost function. To carry out 

cleaning or maintenance, remove frost from the freezer evaporator. 

Simultaneously press and hold the   and   buttons for 3 seconds to 

enable the forced defrosting. The   button will flash. The function 

will deactivate when the temperature reaches 10~12°C.Simultane-

ously press and hold the   and   buttons for 3 seconds turn off the 

forced defrost function at any time. The button stops flashing.

6.  This appliance can display errors and sound an alarm. In the event 

of an error, an error code is displayed on the temperature display 

and the appliance continues to operate.

Additional information on the temperature

• 

The temperature inside the appliance is influenced by many factors. 

How  you  set  the  temperature  control  dial  depends  on  the  ambient 

temperature,  sun  exposure,  how  often  you  open  the  door  and  the 

amount of food stored. The middle setting of the dial is most optimal 

in most cases.

• 

Do not put food into the fridge freezer before it has reached its oper-

ating temperature, which takes minimum 4 hours.