Hansa BK 347.4 NFC - Инструкция по эксплуатации - Страница 37

- 37 -

Mains connection

• 

Prior to connection, it is recommended to set the temperature control 

knob  to  an  „OFF”  or  other  position  that  disconnects  the  appliance 

from the power supply (See page with the control description).

• 

This  appliance  should  be  connected  to  AC  220-240V  50Hz  supply 

socket. The socket must be fitted properly, and must be supplied with 

an earthing conduit and a 10A fuse.

• 

It is a legal requirement that the appliance is properly earthed. The 

manufacturer will not be held liable for any damage or injury which 

may result from the failure to fulfil this requirement.

• 

Do not use adapters, multiple sockets and two-wire extension leads. 

If it is necessary to use the extension lead, it must be equipped with 

a protection ring and a single socket and must have a VDE/GS safety 

certificate.

• 

If an extension lead is used (with a protection ring and safety certif-

icate), its socket must be located at a safe distance, away from the 

sinks, and must not be in a place where it could be flooded by water 

or waste water.

• 

See the type plate at the lower part of the internal wall of the appli-

ance for detailed specifications**.

Disconnecting the mains

Make  sure  the  appliance  can  be  easily  disconnected  from  the  mains, 

either  by  pulling  the  plug  out  of  the  mains  socket,  or  by  switching  the 

two-pole switch off (fig. 9).

Climate range

The information about the climate range of the appliance is provided 

on the rated plate. It indicates at which ambient temperature (that is, 

room temperature, in which the appliance is working) the operation of 

the appliance is optimal (proper).

Climate range

Permissible ambient temperature

SN

from +10°C to +32°C

N

from +16°C to +32°C

ST

from +16°C to +38°C

T

from +16°C to +43°C

* Only free-standing appliances

** According to the model