Ryobi RGN3600 5133002563 - Инструкция по эксплуатации - Страница 20

6

| English

ELECTRICAL

EXTENSION CORD CABLE SIZE

Refer to the table below to ensure the cable size of the extension cords you use are capable of carrying the required load. 
Inadequate size cables can cause a voltage drop, which can damage the appliance and overheat the cord.

Current in 

Amperes

Load in Watts

Maximum Allowable Cord Length

At 230 V

6.0 mm² Wire

4.0 mm² Wire

1.5 mm² Wire

1.0 mm² Wire

2.5

600

300 m

180 m

120 m

75 m

5

1200

150 m

90 m

60 m

40 m

7.5

1800

100 m

60 m

40 m

30 m

10

2400

75 m

45 m

30 m

15 m

15

3600

45 m

30 m

20 m

20

4800

40 m

20 m

25

6000

30 m

30

7200

20 m

40

9600

ELECTRICAL MOTOR LOADS

It is characteristic of common electric motors in normal operation to draw up to six times their full load running current while 
starting. This table may be used to estimate the watts required to start electric motors; however, if an electric motor fails 
to start or reach running speed, turn off the appliance or tool immediately to avoid equipment damage. Always check the 
requirements of the tool or appliance being used compared to the rated output of the generator.

Motor Size (H.P.)

Running Watts

Watts Required to Start Motor

Universal

Capacitor

Split Phase

1/8

275

not applicable

850

1200

1/6

275

600

850

2050

1/4

400

800

1050

2400

1/3

450

950

1350

2700

1/2

600

1000

1800

3600

3/4

850

1200

2600

-

1

1100

not applicable

3300

-

 CAUTION

Operating voltage and frequency requirement of all electronic equipment should be checked prior to plugging them 
into this generator. Damage may result if the equipment is not designed to operate within a ±10% voltage variation, 
and ±3 Hz frequency variation from the generator name plate ratings. To avoid damage, always have an additional 
load plugged into the generator if solid state equipment (such as a television set) is used. A power line conditioner is 
recommended for some solid state applications.