Ryobi+ RY18CS20A-0 - Инструкция по эксплуатации - Страница 8

8

Original Instructions

Regularly check the chain tension. When cutting smaller 
branches (less than the full length of the guide bar) the chain 
is more likely to be thrown o

ff

  if the tension is not correct.

LOW-KICKBACK SAW CHAIN

The low-kickback saw chain helps to reduce the possibility 
of a kickback event.
The rakers (depth gauges) ahead of each cutter can 
minimise the force of a kickback reaction by preventing the 
cutters from digging in too deeply. Use only replacement 
guide bar and chain combinations that are recommended 
by the manufacturer.
As saw chains are sharpened, they lose some of the low-
kickback qualities, and extra caution is required. For safety, 
replace saw chains when cutting performance decreases.

SPIKED BUMPER

The integral bumper spike may be used as a pivot when 
making a cut. It helps to keep the body of the chainsaw 
steady while cutting. When cutting, push the product forward 
until the spikes dig into the edge of the wood, then move the 
rear handle up or down in the direction of the cutting line to 
help ease the physical strain of cutting.

OVER-TEMPERATURE PROTECTION

The battery pack has over-temperature protection, which 
is designed to protect the battery cells from damage in the 
event of high temperatures. This feature may cause the 
battery to stop powering the product until the battery cells 
cool down. If the battery pack is warm to touch, allow it to 
cool down before resuming operation. If the product still 
does not work, connect the battery pack to the charger, 
which can also indicate over-temperature protection. When 
the battery cells cool down, the charger begins to charge 
the battery. 

NOTE:

 High ambient temperatures above 30° C and high-

power tools, such as chainsaws, can cause the battery cells 
to heat up faster. Monitor the battery pack regularly, and if 
it is warm to touch, change the battery or allow the battery 
to cool down.

NOTE:

 The battery pack LED indicator stops working if the 

battery protection feature has caused the battery pack to 
stop powering the product.

SYMBOLS ON THE PRODUCT

Safety alert

Read and understand all instructions 
before operating the product. Follow 
all warnings and safety instructions.

Wear eye, ear, and head protection.

Wear non-slip safety footwear when 
using the product.

Wear non-slip, heavy-duty gloves.

Beware of chain saw kickback and 
avoid contact with bar tip.

Do not expose the product to rain or 
damp conditions.

Hold and operate the saw properly 
with both hands.

Do not operate the saw using only 
one hand.

European Conformity Mark

British Conformity Mark

EurAsian Conformity Mark

Ukraine Conformity Mark

Waste electrical products should not 
be disposed of with household waste. 
Please recycle where facilities exist. 
Check with your local authority or 
retailer for recycling advice.

Guaranteed sound power level

Rotate to adjust the chain tension
+ = Tighten the chain
- = Loosen the chain

Moving direction of the chain.
(Marked under the sprocket cover)

SYMBOLS IN THIS MANUAL

Parts or accessories sold separately

Note

Warning

Wear eye and face protection.

Wear upper body protection.

Wear leg protection.

Stop the product.