Ryobi+ RY18CS20A-0 - Инструкция по эксплуатации - Страница 7

ENGLISH

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR

7

Original Instructions

On a fallen tree, a rooted stump has a high potential of 
springing back to the upright position during the bucking 
cut to separate the log from the stump. Watch out for 
springpoles—they are dangerous. Do not attempt to cut 
bent branches or stumps that are under tension unless you 
are professionally trained and competent to do so.

WARNING!

 Springpoles are dangerous and could strike 

the operator, causing the operator to lose control of the 
chainsaw. This could result in a severe or fatal injury to the 
operator. Cutting spring poles should be done by trained users.

TRANSPORTATION AND  STORAGE

■

Turn off the product, remove the battery pack, and allow 
the product to cool down before storing or transporting.

■

Remove all foreign materials from the product. Store the 
product in a cool, dry, and well-ventilated place that is 
inaccessible to children. Keep the product away from 
corrosive agents, such as garden chemicals and de-
icing salts. Do not store the product outdoors.

■

Fit the guide bar cover before storing the product or 
during transportation.

■

For transportation, secure the product against movement 
or falling to prevent injury to persons or damage to the 
product.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.
Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps or 
tape. Do not transport batteries that are cracked or leaking. 
Check with the forwarding company for further advice.

MAINTENANCE

■

Use only original manufacturer’s replacement parts, 
accessories, and attachments. Failure to do so can cause 
possible injury, can contribute to poor performance, and 
may void your warranty.

■

Servicing requires extreme care and knowledge 
and should be performed only by a qualified service 
technician. Have the product serviced by an authorised 
service centre only.

■

You may make adjustments or repairs described in this 
manual. For other repairs, have the product serviced by 
an authorised service centre only.

■

Consequences of improper maintenance, removal, or 
modification of safety devices, may cause the product to 
not function correctly, increasing the potential for serious 
injury. Keep the product professionally maintained.

■

Sharpening the chain safely is a difficult precision task 
that should be performed only by experienced skilled 
professionals. The manufacturer strongly recommends 
that a worn or dull chain is replaced with a new one, 
available at your authorised service centre. The part 
number is available in the product specification table in 
this manual.

■

Follow the instructions for lubricating and chain tension 
checking and adjustment.

■

After each use, clean the plastic parts with a soft, dry 
cloth.

■

Check all nuts, bolts, and screws at frequent intervals 
for security to ensure that the product is in safe working 
condition. Any part that is damaged should be properly 
repaired or replaced by an authorised service centre.

■

Add lubricant directly onto the bar and chain before each 
use and every 3 minutes during use.

MAINTENANCE SCHEDULE

Daily check

Bar lubrication

Before each use and frequently

Chain tension

Before each use and frequently

Chain sharpness

Before each use (visual check)

For damaged parts

Before each use

For loose fasteners

Before each use

Inspect and clean

Bar

Before each use

Complete saw

After each use

KNOW YOUR PRODUCT

See page 189.

1. Guide bar
2. Saw chain
3.  Front hand guard
4. Front handle
5. Rear handle
6. Operator's manual
7. Wrench
8.  Chain tensioning screw
9. Switch trigger
10. Trigger release
11. Sprocket cover
12. Sprocket cover screw
13. Lubricant
14. Guide bar cover
15. Battery pack
16. Charger

SAFETY DEVICES

CHAIN CATCHER

The chain catcher prevents the saw chain from being thrown 
back towards the operator if the saw chain comes loose or 
breaks.

GUIDE BARS

Generally, guide bars with small radius tips have a 
somewhat lower potential for kickback. Use a guide bar and 
matching chain that is just long enough for the job. Longer 
bars increase the risk of loss of control during sawing.