Simfer B6GM12016 - Инструкция по эксплуатации - Страница 9

9

WARNING: Check for any damage on the product before installing it. 

Do not have product installed if it’s damaged. Damaged products pose 

danger for your safety.

Important Warnings for Installation:

Cooling fan shall take extra steam out 
and prevent outer surfaces of appliance 
from overheating during operation of 
oven. This is a necessary condition for 
better appliance operation and better 
cooking.
Cooling fan shall continue operation 

after cooking is finished. Fan shall 

automatically stop after cooling is 
completed.

A  clearance  must  be  left  behind  the  enclosure  where  you’ll  place  the 

appliance  for  efficient  and  good  operation.  This  clearance  shouldn’t  be 
ignored as it’s required for ventilation system of the appliance to operate.

Right Place For Installation
Product has been designed to be mounted to worktops procured from 

market. A safe distance must be left between the product and kitchen 
walls or furniture. See the drawing provided on the next page for proper 
distances. (values in mm)

•  Used surfaces, synthetic laminates and adhesives must be heat 

resistant. (minimum 100°C).

•  Kitchen cupboards must be level with product and secured.
•  If there is a drawer below the oven, a rack must be placed between 

oven and drawer.

WARNING: Do not install the product next to refrigerators or coolers. The 

heat emitted by the product increases the energy consumption of cooling 

devices.

WARNING: Do not use door and/or handle to carry or move the product.

Figure 1

GB