Kuppersberg HH 668 W - Инструкция по эксплуатации - Страница 12

12

TECHNICAL PASSPORT

ENGLISH

Electric oven

oven will start working automatically at 

13.00).

The function AUTO is now on; the 

oven will start operating from the point 

when the difference between the set 

operation end time and the operation 

duration time occurs (e.g. the operation 

time is set to 1 hour, the operation end 

time is set to 14.00, so the oven will 

start working automatically at 13.00).

When the oven reaches the operation 

end time it will switch off automatically, 

the alarm will be activated and the 

function AUTO will start flashing again.

Â

Set  the  oven  function  knob  and 

the tem- perature regulator knob to the 

switched–off position.

Â

Press sensor 

MENU

, < / > in order 

to switch off the alarm; the function 

AUTO  will  go  out  and  the  display  will 

show the current time.

Cancel settings

Timer and automatic function 

settings may be cancelled at any time.

Cancel automatic function settings:

Â

press sensors < / > simultaneously,

Cancel timer settings:

Â

press sensor MENU to select 

timer settings,

Â

press sensors < / > again,

Change the timer beeps

The tone of the timer beeps may be 

changed as follows:

Â

press sensors < / > simultaneously,

Â

select “tone” function with the 

1 sensor, the display panel will start to 

blink:

Â

with the > sensor press the 

appropriate sensors from 1 to 3 to 
select the option you wish. 

Â

Oven functions and operation.

Â

Oven with automatic air 

circulation (including a fan and top and 

bottom heaters)

The  oven  can  be  warmed  up  using 

the bottom and top heaters, as well 

as  the  grill.  Operation  of  the  oven  is 
controlled by the oven function knob – 

to set a required function you should 

turn  the  knob  to  the  selected  position, 
as  well  as  the  temperature  regulator 
knob  –  to  set  a  required  function  you 
should  turn  the  knob  to  the  selected 

position.

The oven is equipped with a 

retractable  knobs.  In  order  to  select  a 
function do the following:

B

Gently press and release a 

knob which will pop out,