Kuppersberg HH 668 W - Инструкция по эксплуатации - Страница 10

10

TECHNICAL PASSPORT

ENGLISH

Electric oven

Electronic programmer

functions

MENU

 ­ function selection button

< – sensor  “–”

> – sensor  “+”

The  electronic  prgrammer  is 

equipped with electronic sensors 

which  are  switched  on  by  touching  or 

pressing the sensor surface for at least 

one second.

Each  sensor  reaction  is  confirmed 

by the beep. Keep the sensor surface 

clean at all times.

Setting the time

After connection to the mains or 

reconnection after a power cut the 

display shows flash

Â

Touch and hold 

MENU

 (or simulta 

neously touch < and >) until you will see 

 on the display and the dot below the 

symbol is flashing,

Â

Touch < or > within 7 seconds to 

set the current time.

To  store  the  new  time  setting,  wait 

approximately 7 seconds after time has 

been set. The dot below the   symbol 

will stop flashing.

You can adjust the time later. To do 

this touch < / >, simultaneously and 

adjust the current time while the dot 

below the 

 symbol is flashing.

Caution!

If the correct time is not set then 

proper operation of the oven is not 

possible.

Timer

The timer can be activated at any 

time,  regardless  of  the  status  of  other 

functions. The timer can be set for from 

1 minute to up to 23 hours and 59 

minutes.

To set the timer you should:

Â

Press sensor 

MENU

, then the 

display will show flashing 

Â

Set  the  timer  using  sensors  <  / 

>. The time set is shown on the display 

and the signal function is on.

Â

Press sensor 

MENU

, < / > in order 

to  switch  off  the  signal,    the  signal 

function will go out and the display will 

show the current time.

Caution! 

If  the  alarm  signal  is  not  turned 

off manually, it will be turned off 

automatically after approx 7 minutes.

Semi–automatic operatino

If the oven is to be switched off at a 

given time, then you should:

Â

Set  the  oven  function  knob  and 

the tem- perature regulator knob to the 

setting  at  which  you  want  the  oven  to 

operate.