Kaiser EH 4747 - Инструкция по эксплуатации - Страница 6

6

 EN 

INSTALLATION  INSTRUCTIONS 

ELECTRICAL CONNECTION

Before connecting the oven to the mains power 

supply, make sure that: 

x

  The supply voltage corresponds to the 

specifications on the data plate on the front 

of the oven. 

x

  The mains supply has an efficient ground 

connection complying with all applicable 

laws and regulations. 

Correct grounding is a legal requirement. If the 

appliance is not pre-fitted with a power cable 

and/or plug, use only suitable cables and plugs 

capable of handling the power specified on the 

appliance's data plate and capable of resisting 

heat. The power cable should never reach a 

temperature 50 °C above ambient temperature at 

any point along its length.  

If the appliance is to be connected directly to 

mains terminals, fit a switch with minimum 

aperture of 3 mm between the contacts. Make sure 

that the switch is of sufficient capacity for the 

power specified on the appliance's data plate, and 

compliant with applicable regulations. The switch 

must not break the yellow-green earth wire. The 

socket or switch must be easily reachable with the 

oven fully installed. 

Attention! 

 The manufacturer declines all 

responsibility for damage or injury if the 

above instructions and normal safety 

precautions are not respected. 

Attention!

 Installation and electrical 

connection must be made by a qualified 

expert only.