Fulgor Milano LO 6113 TC ME - Инструкция по эксплуатации - Страница 61

60

61

GB

60

61

GB

When finished with the settings, the display summarizes the recipe 

set. The colon in the cooking time (00:30) will be flashing to indicate 

that it can be changed.

To change it, use the - +  buttons.

Or select the 

 function directly and, in this way, the cooking 

program starts with a countdown of the preset time on the display.

ATTENTION: certain recipes use pre-heating, so put the dish in when the oven has 

reached the set temperature and the display shows “PRE-HEATING FINISHED PUT IN 

THE DISH”

When cooking is finished the display will flash “PROGRAM FINISHED REMOVE THE 

DISH” and, at the same time, the oven will beep until you press a key or open the door.

Note: at any moment, if you make a mistake choosing the values and/or you want to change the settings of your 

recipe, you can select 

 which cancels it and allows you start over from the beginning of the procedure.

NOTE: If you are cooking with the modified parameters of a pre-set recipe, while the oven beeps at the end of 

cooking, you will see: 

see how to save recipes in the next paragraph.

Personalising recipes

Once you have changed the cooking time of a preset recipe and executed it, you can save it for the 

next by storing the new parameters you used (weight and cooking time).

At the end of the cooking cycle of the modified recipe, the icon below will appear and, to save it, 

proceed as follows:

- with the + key select “YES”

- confirm with   the time used is displayed,

- change it with + and - and confirm with   , the weight used appears,

- change it with + and - and confirm with   , you will see the message

“Recipe saved POS. 001”, and so on, in ascending order

Each time you access the “PERSONAL RECIPES” menu, you will find it saved in your recipes.