Fulgor Milano LO 6113 TC ME - Инструкция по эксплуатации - Страница 59

58

59

GB

58

59

GB

Now, set the end-of-cooking time: the 
control normally adds the cooking time 
to the current time, so it proposes an 
end-of-cooking time, which in our case 
would be 10:30 (8:30+2:00).

Change the end-of-cooking time to what you want, 
in our example 13:00

The oven goes to standby mode, turning off the oven light.

The control automatically turns the oven on at 11:00 (13:00-2:00) and turns it off at 
13:00. The roast will be ready when you return!

Programming the timer: minute-counter

The minute-counter is a function of the timer that is independent from the operation of the oven, i.e., it 
does not stop cooking or turn off the oven but functions as an alarm. You can set it at any time, such as 
to remind you when to check cooking on the burners, in addition to the oven, or for other kitchen tasks.
It is even available when the oven is off and, in this case, just touch the timer function symbol one time.
But, if you are using it with the oven on, you must touch the time function symbol three times:

The separator dots flash to indicate you can set the 
time.

Touch the “+” and “-” symbols to set the minutes.
The countdown starts now. After the indicated time passes, the over will and the dedicated symbol will 
flash: press any button to stop the beep.

Programming the timer: cancelling the program

To cancel a program, you must set the previously assigned value to zero or turn on the oven.